I have for sale a used Paris Ready For Flight board. It has an Arduino Pro Mini 5/16mhz, authentic Wii Motion Plus, and Bosch BMA020 accell breakout board+ PPM module for Spektrum. It also has autolevel. This board is already soldered up with the pins installed. All you have to do is plug,tune,play. It is flashed for a Y6 right now. The reason I am selling is I have waaaaay too many FC's so selling a few. I will let it go for $130 del. I will also sell it without the PPM module for $110 if you do not use Spektrum. Pics to follow.

A quick question on the board. What does the ppm module do?
Do I need this to get it flying?
I ask, as I have a Warthox board have Spek rx connected directly to the board.

Originally Posted by actionplus

A quick question on the board. What does the ppm module do?
Do I need this to get it flying?
I ask, as I have a Warthox board have Spek rx connected directly to the board.

I assume yours is not flying like that. As far as I know it will not work with spektrum without the PPM module.

I have not flown yet. I have put it together and plan to plug everything in today with the GUI.(1.7)

hey tony, how does it fly? I haven't tried a wii yet? I haven't liked any FC I have except the gaui and perhaps my new Hoverfly pro and MK clones, but I haven't tried those 2 yet.
do these fly as smooth and stable as the GU-344, my gaui flies rock solid, even hands off.

Originally Posted by RChelisrule

hey tony, how does it fly? I haven't tried a wii yet? I haven't liked any FC I have except the gaui and perhaps my new Hoverfly pro and MK clones, but I haven't tried those 2 yet.
do these fly as smooth and stable as the GU-344, my gaui flies rock solid, even hands off.

I only nstalled mine to make sure it works. I neer tuned it or noting but warthox a more MWC vids than with any other FC and they look sweet.
Here is a MWC FC on a quad->

mwc quad- touch 'n' go (2 min 47 sec)

Here is one one a Y6->

mwc mini y6 - fun flying (1 min 49 sec)

I may get one to make a y6, a little better I heard than the kk 5.5 for y6's. I will have to build my own though, I am CHEAP. the board looks awsome for sport flight for sure! I wonder how stable they are for AV? I bet there pretty good with the nun chuck.

Originally Posted by Z06 Tony

I have for sale a used Paris Ready For Flight board. It has an Arduino Pro Mini 5/16mhz, authentic Wii Motion Plus, and Bosch BMA020 accell breakout board+ PPM module for Spektrum. It also has autolevel. This board is already soldered up with the pins installed. All you have to do is plug,tune,play. It is flashed for a Y6 right now. The reason I am selling is I have waaaaay too many FC's so selling a few. I will let it go for $130 del. I will also sell it without the PPM module for $110 if you do not use Spektrum. Pics to follow.

give you $300 for the whole y6

Hey Tony, Nice frame ,Who sells them?

Originally Posted by JET MAN TWO

Hey Tony, Nice frame ,Who sells them?

your answer will require an open pocket book! not for the faint!

DUUUUUUUDE! That first video is insane!!!!

Originally Posted by JET MAN TWO

Hey Tony, Nice frame ,Who sells them?

I bought it here-> http://www.rchobbyhelicopter.com/sto...tom_UAV_Frames

I have another one but have not built it yet.

thats for sure damn that frame is almost 750.00 alone wow

Originally Posted by Quad_Addict

your answer will require an open pocket book! not for the faint!

that frame cost some serious doe man nice

Originally Posted by Z06 Tony

I bought it here-> http://www.rchobbyhelicopter.com/sto...tom_UAV_Frames

I have another one but have not built it yet.

that first video is pretty damn sick

Originally Posted by Z06 Tony

I only nstalled mine to make sure it works. I neer tuned it or noting but warthox a more MWC vids than with any other FC and they look sweet.
Here is a MWC FC on a quad->

http://www.vimeo.com/22909958


Here is one one a Y6->

http://www.vimeo.com/23010622