|Mar 10, 2013, 12:25 AM|
United States, TX, League City
Joined Feb 2013
UBEC question for PT260 servo with 2S or 3S lipo
I'll be putting a PT260 servo in a truck with a 2S 6600mah 50c lipo (7.4V) running the motor and a 3S 1000mah 20c lipo (11.1V) running the 5.8ghz Tx and camera.
The question is, my pan servo (PT260) runs on 4.8v-6v. What's the best way to power this? I'm currently planning to get a UBEC to regulate one of those sources down to 5V. Is that the right way to go? Is there a better way to get power to that servo? I'd rather tie into 3S TX/Camera battery so I can easily remove the entire FPV setup (pan/TX/Cam/battery) when it's not going to be used and not take any power from the vehicle motor.
Can anyone suggest a good (and inexpensive if possible) way to get this done?
p.s. The vehicle is a Traxxas Slash VXL with 3S ESC.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Sold NEW Parkzone 3S 1800mah Lipo & NEW 2S/3S car charger||mjbennett9||Aircraft - Electric - Batteries & Chargers (FS/W)||2||Jan 21, 2013 03:05 PM|
|For Sale Grab Bag 8 Lipo Batteries: 10s, 4s, 3s, 2s||helijet||Aircraft - Electric - Batteries & Chargers (FS/W)||2||Jan 18, 2013 08:34 PM|
|Sold eSky 2S or 3S lipo charger with AC adapter.||CuStOm||Aircraft - Electric - Batteries & Chargers (FS/W)||2||Jan 17, 2009 02:31 PM|
|Question Himax 2025-4200 With 2s or 3s lipo.||DWA||Power Systems||22||Jan 22, 2005 08:56 AM|
|Question Himax 2025-4200 With 2s or 3s lipo.||DWA||Parkflyers||18||Jan 17, 2005 02:00 AM|