Originally Posted by x_rui

Is that a fact or a question?

Fact.

When one side transmit TX pin transmiting other must Recieve Rx pin recieving and vice versa.

Today arrive AIOP to me and for information was in antistatic bag and in the hard paper box for protection, look that Nina read this thread carefully

Hi are these the receiver connections regardless of what
#define TX_CHANNEL_SET is set to in megapirate?



Thanks.

MegaPirate Ninja

Hi there guys, got my crius for quite a while now.

Really not happy with the stabilization at all, it wobbles like fat tire, unresponsive like a cat.
oscillates like a horny man D:.

and i dont think its on the P at all, tried going from 0-5, no changes D:
i tried everything

My accelerometer keeps resetting it self

I would try to make a video but its really hard to get a good shot.

Originally Posted by Multor

MegaPirate Ninja

Hi there guys, got my crius for quite a while now.

Really not happy with the stabilization at all, it wobbles like fat tire, unresponsive like a cat.
oscillates like a horny man D:.

and i dont think its on the P at all, tried going from 0-5, no changes D:
i tried everything

My accelerometer keeps resetting it self

I would try to make a video but its really hard to get a good shot.

Sounds like a can of random!, what pill did you take? the blue(MPNG) or red(MWii)?

Megapirateninja
what could be wrong is the PPM SUM putting me back or something?

I found this in this thread. "- Lipo voltage sense: connects to pin A3 from A0~A5 plug"
How do i do this ? do i just connect positive from lipo in to a3 ? This thread needs sub cats

For anybody looking to get a Gimbal working with MultiWII 2.1

Hi. So I've configured my radio to match mission planner. And reversed channels so that everything goes in the right direction in that. Should that mean that my channels should be correct? When I try to fly pitch seems to be reversed and possibly something else.

Thanks.

Can Some one list some starting PID settings for multiwii 2.1 on a 450 quad
I just got some apc props. And dubro balencer. They spin buttery smooth.
But my quad refuses to hover/fly. It spins up then cuts out spins up then one side dips. cuts out. then the side that dips starts up again and the other side falls.

Before I thought this was a vibration issue. But I'm not getting significant readings from the accel. On the graph.
My board it mounted to the top. With Velcro mounted to 2 layers of double sided foam tape.. That my problem?
I can take a video today after work if it will help you help me.
Thanks

Originally Posted by scribble007

Can Some one list some starting PID settings for multiwii 2.1 on a 450 quad
I just got some apc props. And dubro balencer. They spin buttery smooth.
But my quad refuses to hover/fly. It spins up then cuts out spins up then one side dips. cuts out. then the side that dips starts up again and the other side falls.

Before I thought this was a vibration issue. But I'm not getting significant readings from the accel. On the graph.
My board it mounted to the top. With Velcro mounted to 2 layers of double sided foam tape.. That my problem?
I can take a video today after work if it will help you help me.
Thanks

The default PID's should be OK for a 450 size Quad & it doesn't sound like its the Gains, if it was it would spin up & take off but just oscillate (wobble/shake) while hovering.

A video & maybe a photo as well showing how the Board is actually mounted would help .

Originally Posted by NDw

Hi. So I've configured my radio to match mission planner. And reversed channels so that everything goes in the right direction in that. Should that mean that my channels should be correct? When I try to fly pitch seems to be reversed and possibly something else.

Thanks.

dont reverse your channels in the mission planner as if you upgrade your software you could forget to redo this and well could crash or worse! reverse the channels on your radio that way they are always done

hint:

for mwii, tune roll/pitch PID
for megapirate, tune roll/pitch RATE (not the pid part)

Guys i'm having trouble configuring MPNG failsafe feature on 2.7 R4, can anyone give me some light on the subject?

Thank you