Kin,

i just purchased the SH800-000 seahawk 800 fuz, but there were no instructions, do you have a pdf for it?

thx, Didier

Yes... Kin, thank you! Carbon Fiber blades, with a root, that would allow for the blades to fold back!
I need those blades, yesterday!

Originally Posted by didier n

Kin,

i just purchased the SH800-000 seahawk 800 fuz, but there were no instructions, do you have a pdf for it?

thx, Didier

Hi Didier
do you mean the 800 size? from which shop did you get it? comments on how it looks so far??? tks Peter

Originally Posted by didier n

Kin,

i just purchased the SH800-000 seahawk 800 fuz, but there were no instructions, do you have a pdf for it?

thx, Didier

it is my last work in my old factory . but i think they not yet finish the manual when i have leave there , but you can e mail me any i can teach you how to do , but it is very easy ! , first you just finish the mechanic (lower side frame ) that is included in the kit . you can post here now and i teach you step by step ! i think you buy it from RCA erodyne !

I got it from microhelis.de in aachen germany, it's an hour drive from home :-)
Thx for the offer Kin, but i'll figure it out, the model will maybe be build next year, have to finish an OH 58 kiowa first...
I had a quick look at it and i'm happy with the way it looks, gelcoat is a bit rough, but with some sanding it will be ok. I was pleased with all the details and extra 's that come with it, have to compare it with the full size later, but it 'll have to wait

greets,

Didier

Originally Posted by didier n

I got it from microhelis.de in aachen germany, it's an hour drive from home :-)
Thx for the offer Kin, but i'll figure it out, the model will maybe be build next year, have to finish an OH 58 kiowa first...
I had a quick look at it and i'm happy with the way it looks, gelcoat is a bit rough, but with some sanding it will be ok. I was pleased with all the details and extra 's that come with it, have to compare it with the full size later, but it 'll have to wait

greets,

Didier

ok ! just e mail me anytime if you have any question . wankin007@yahoo.com.hk

Originally Posted by Scaleman01

The Bell 429 in Air Zermatt design will be available at scaleflying.de
in a few weeks.
We are just preparing the container.

We will also have the AS350 700size in Air Zermatt design

For European customers the Bell 429 and the AS 350 (both in Air Zermatt and other designs)
are only available at scaleflying.de

Please check our website and soon you can set pre orders

the 429 will be produce in what size ?

Originally Posted by ben429

the 429 will be produce in what size ?

The size is 1.8m and 400mm high .

Kin..I have sent mail both to you and Bandy on the stated emailadresses on Sm website, this was last week, no reply att all, is the mail up to date?

/Jack

Originally Posted by Jack Söderberg

Kin..I have sent mail both to you and Bandy on the stated emailadresses on Sm website, this was last week, no reply att all, is the mail up to date?

/Jack

Sorry for too busy and missing your mail , i get your mail . but the out maket date is decision by our dealer , but it come out very soon .just check their website !

Originally Posted by kin

Sorry for too busy and missing your mail , i get your mail . but the out maket date is decision by our dealer , but it come out very soon .just check their website !

I suppose you adressing the new bell fuse as mentioned early,well I was writing about about possibility to ship with ems when ordering directly from you,not the fuselage.

/Jack

Originally Posted by Scaleman01

The Bell 429 in Air Zermatt design will be available at scaleflying.de
in a few weeks.
We are just preparing the container.

We will also have the AS350 700size in Air Zermatt design

For European customers the Bell 429 and the AS 350 (both in Air Zermatt and other designs)
are only available at scaleflying.de

Please check our website and soon you can set pre orders

I contacted scaleflying.de and they told me the 429 will not be ready until the middle of December (10 to 12 weeks).

Originally Posted by glegee

I contacted scaleflying.de and they told me the 429 will not be ready until the middle of December (10 to 12 weeks).

I think this Bell 429 in Air Zermatt colour scheme is one of their choice but not in first batch , So please wait it , time is going very fast .if you have time now you can build this Air wolf -600 new model , it is door open version . the front door open for very easy to exchange the battery and the door have scale door frame .when you open the door , you will see the door have 8mm thickness and easy to fit our optional scale cockpit .the kit is come with scale cnc suspension struts .No need find other optional landing gear .retract will have two servo control . one for nose and one for rear . the big top hatch (two piece ) for very easy to install the mechanic . it can nitro and ep mechanic . Hirobo,Raptor, Trex,.....many mechanic can fit it .top hatch rear part is fix with screw . front part for fast openning to exchange the battery or you can let the battery come and out in the front door .if you have buy our scale cockpit . you can let the battery exchange in the front top hatch cover .you have choice ! but other market airwolf is not easy to open the hatch ,and one version is whole front part moveable , but the cutting line look bad . so this design i think is better ! the fuselage is two piece for easy shipping and lower cost .door hinge is included . the detail photo will post soon.

Looking forward to see the arrival of yr 2012 products, share more photos pls

Originally Posted by eff

Looking forward to see the arrival of yr 2012 products, share more photos pls

Ok ok ! let see this Air wolf 600 master plug finished , it come out first models about one week or 10 days . it is door openning , the first open door in market , and kit come with cnc suspension retract gear . and possible combo with a two blades head (SM Jetranger head). The first batch special offer detail scale cockpit combo and included scale tail rotor blades .It is two piece fuselage .very lower shipping cost .Very happy for dealer and end user , because if you crash your tail . we can offer the tail boom replacement part .