|Oct 05, 2013, 11:39 AM|
New 50-60cc Slick540 First Look Video!
Join Pete for a first look at the new Aerobeez Slick540!
|Oct 16, 2013, 07:45 PM|
Aerobeez 87" Slick 540 Maiden
We finally got the first one assembled and put it through maiden flight. All I could say is that we couldn't be happier with this new slick. From the build the the overall quality to the flying it's a smooth process.
This Slick has lots of quick build feature to make assembling time a lot easier and get you in the air in a lot less time. What I mean is that this Slick as the aileron and elevator pre-glued in the factory. And if you are like me who take our time to make sure all the control surfaces are done correctly, you know that usually we spend whole first day of building pretty much on gluing the hinges and holding them to make sure they are in place properly. Not anymore now that every piece is pre-glued and checked at the factory that takes a lot out of the equation.
Another thing is that the fuel tank is pre-plumbed and installed into the fuse already. So if you decide to stick with the stock fuel tank that alone would save you another 30mins. Everything else fit smoothly. I didn't have to modify anything to make it fit.
The color scheme is just beautiful and I they did a great job on it. The paint job on these Slick is just amazing. You can tell by how perfectly the line matches on the cowl to the fuselage. Also see how shiny the finishing is.
Because we put a brand new DLE55RA the first few fight was aiming to break in the motor and trim the plane. After we ran 1 tank of fuel on the ground it's time to take the plane in the air for some break in maneuver.
All it took to trim was 3 click of elevator and 2 clicks of rudder and the Slick just flew straight like an arrow. The CG was right on the spot. Inverted flight was almost level. I was ready to throw it around already but I had to remind myself that it's a break in flight.
During the 2nd flight I was able to wring it around a bit more. Pop top, rolling harrier, torque rolling, knife edge, this bird is so light and tracks so well that it keep asking for more. But I didn't want to push the engine too hard so I just waited for a few more flights before pushing it. But I was able to hover her around myself--one of my favorite move (not recommended for anyone at "home"). This bird to me is has anything one could ask for from a Slick-floaty, precise, track and hover effortlessly--what a 3D machine.
Here are some of the pictures from the maiden day. Please stay tuned for flight video that is coming shortly. Thanks.
Some close up shots of the plane during build process:
More info and review of the plane will be updated here soon. Thanks.
|Oct 16, 2013, 09:03 PM|
Sorry double posted! Maiden is above this post! Thanks!
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Sold||First place engines 60cc||Walker986||Aircraft - Fuel - Engines and Accessories (FS/W)||0||Jul 10, 2013 05:50 PM|
|Found||50 - 60cc 3D airframe close to DFW, Texas (Pilot, EF, AW, 3DHS, Etc)||tnt1106||Aircraft - Fuel - Airplanes (FS/W)||0||Jan 04, 2013 10:40 AM|
|Found||50 ta 60cc gas||VampeD4||Aircraft - Fuel - Engines and Accessories (FS/W)||0||Sep 08, 2011 05:50 PM|
|Wanted||Used 50-60cc gas engine||marksextra||Aircraft - Fuel - Engines and Accessories (FS/W)||0||Jan 27, 2011 01:26 AM|
|Sold||Edge 540 50-60CC||"BV"||Aircraft - Fuel - Airplanes (FS/W)||7||Apr 24, 2008 11:18 PM|