|Feb 27, 2012, 01:23 PM|
I purchased a used plane 4mo. old and it is stange on power up.
Put the stick all the way up and it slowly powers up to full power.after that it responds normal. Ckecked with parkzone and they said they have never heard of this. They want me to borrow the ESC and motor from another trojan and see what is wrong,then would I please call them back and let them know the problem.
Has anyone else had this problem?
I checked with the original owner and he said it has always done this.(new to sport). I have 3 other Parkzone warbirds and none do this.
I checked the start up rate and it is at 0.25 seconds.
|Feb 27, 2012, 03:47 PM|
I was thinking the start up rate would be that.
It is set at 0.25
Two choices 0.25 or 1 second
The tx works fine with other Parkzone planes
|Feb 27, 2012, 05:11 PM|
It is definitely the ESC
Tried another one and motor worked fine
It seams like this ESC is set for Heli start up.
Does anyone know how to change it?
|Feb 27, 2012, 09:53 PM|
|Feb 29, 2012, 09:20 PM|
Australia, WA, Currambine
Joined Apr 2011
Have you looked in the PZ setup manual. look at program 7 in the ESC setup, it may be in the heli mode.
I hope that this helps you.
Sorry, I did not see the post that you had already fixed your problem, at least there is a manual for others to look at if help is required.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion Parkzone Trojan Vs. Parkzone Corsair||Supercubflyer||Electric Plane Talk||26||Oct 18, 2011 09:36 PM|
|Wanted Rtf Parkzone Trojan or RTF Parkzone Corsair||hbsurfer||Aircraft - Electric - Airplanes (FS/W)||2||Sep 28, 2009 10:15 PM|
|Found Parkzone P-51 Brushless BNF or Parkzone T-28 Trojan||CGReload||Aircraft - Electric - Airplanes (FS/W)||3||Aug 10, 2009 10:55 PM|
|Discussion Parkzone Corsair versus Parkzone Trojan direct comparison..||Smokescreen38||Electric Warbirds||14||Jun 30, 2009 07:56 PM|
|Sold Parkzone T-28 Trojan Parts. E-flite 25AMP ESC/Parkzone 480 Motor/2 Props/DC Carger||CGReload||Aircraft - Electric - Power Systems (FS/W)||7||Sep 03, 2008 05:35 PM|