|Aug 21, 2011, 05:43 PM|
i want gps as well but how far is the multiwii software ?
even if we have the bob we still need the program ... does anyone know anything about the development of gps position hold in multiwii ?
|Aug 21, 2011, 06:46 PM|
Have to say documentation have to get better, but i added a second a go a link to a spreadsheet in which every pin get a meaning for the multiwii.
The setup of every multiwii is quite similar, in my case usinf a atmega 2560 instead of the smaller 328, which simply give more options.
It shouldnt be too hard for someone who was able to build several mikrokopters.
The main part, CPU Board, the Flyduino will arrive middle of this week i hope.
Some sensors are needed too, this is may the most tricky part as there are many options.
From simple WMP NK or BMA020, to some fullfeatured 9DOF sollutions, Freeimu, Atmel Boards, Allinone imu etc.
Not that few, most of them are very similar in the components and only need a simple comment in Alex soft and you are ready to go.
The senosrs are similar connected like you did before with your ESC.
The ESC now are driven by a PWM signal, they can be simply directly connected to the Flyduino, no brainer.
YOur RX channels too, you can use both regular and ppm RX.
Of course there is something to learn, best place to start, www.multiwii.com, but lots of people got working configs and are nice guys who like to help.
There are also very great other projects, Megapirate and Aeroquad, at least the Megapirate fully supports my flyduino, but for the start, Multiwii .... its pure fun.
If you got used to it and want to play more, try the pirate, GPS is allready implemented and working.
|Aug 22, 2011, 12:38 AM|
great info I really appreciate the post... I want to keep it simple for this one...
all I require is what was shown in the second video on this page http://warthox.bplaced.net/?cat=10
can someone help out a noob with my parts list?
looks like I need a paris board to mount stuff to... then an arduino mini, and either a wii mote and nun chuck acc or I just buy this...
which come with the ability to upgrade in the future.... oddly enough listed as a hex but I am sure you would just load differnt code for a quad right?
|Aug 22, 2011, 07:34 AM|
Those MWC Board who are offered from me www.flyduino.com , as Warthox did it and gave me, and Alouette who did a Paris on its own are basically mounting bases for the Pro mini and the sensors you choosed.
Regarding the sensor configuration, a LLC, which is implemented on a bob in my sortiment f.e., or externally etc., can make sense, but its not needed if you comment the pullups out in the soft.
With the MWC Board Warthox made as with the Paris, btw Flyduino MWC be back in stock end of month in my shop, you can use all sensors avaiable, both care for 3.3V also,for your info you dont even need at all3.3V for org. wmp and bma020.
But the capability of the Setup is not given by the mounting board you use!
Its given by the cpu board itself the pro mini, they help you to make a clean setup and helps in some cases, 3.3V f.e., but wont add any pin to the cpu, in the case you want to use all features avaiable you may should regard a mega, like my flyduino.
|Aug 22, 2011, 08:30 AM|
Joined Jul 2011
Flyduspider - pre-drilled alu arms
any progress on the flyduspider pre-drilled alu arm? By the way: do you plan to add alu frames for the quad too?
|Aug 22, 2011, 08:49 AM|
did a phone call, wednesday was told me.
It seems wednesday is a big day, new Flyduinos and Aluarms.
Got the GPS bob, will solder one.
|Aug 22, 2011, 02:02 PM|
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|New Product||Please let me introduce myself||jimaquo||Dock Talk||7||Oct 27, 2010 02:27 AM|
|Let me introduce the DEMON!!!! (Transparent covering and eliptical wing!!!)||modest-master||Sport Planes||7||Aug 25, 2002 11:46 PM|
|Let me introduce Angelis 280/400, Benjamin, Zombi (ARFs)||modest-master||Parkflyers||17||Mar 14, 2002 01:20 PM|
|Let me introduce the "NIKE"||modest-master||Electric Sailplanes||3||Mar 07, 2002 05:20 AM|