|Oct 30, 2012, 11:45 PM|
Joined Jan 2011
Eagle tree pro rth
Thank you for any help..
New to the osd. So far have it all working well apart from the rth...
Fail safe works, trim the throttle back works to actervate. It say it is in return to home mode but no servos move no throttle.
It just falls from the sky till it is 100 meters under ground.
(in sim mode)..
I don't have a flight stabilizer yet, dose it need one? I know it helps but i don't think its a must. Its on order anyway
|Nov 02, 2012, 07:00 PM|
Hi, in the simulator (as well as in actual use) you need to be at least approx 60' above the home point for the throttle aspect of RTH to work. Also note that you'll need to have run the "safety wizard" for RTH to work correctly.
Regarding using the stabilizer, it is strongly recommended. But, in the simulator, it does not really affect things, so the simulated model should fly around correctly if RTH is configured correctly.
If you still have problems, can you post your OSD Pro config file (.TXT) and we can check your configuration. This is saved by clicking "Save configuration" on the OSD Pro setup screen.
|Nov 18, 2012, 11:22 PM|
If you need further assistance, there are many qualified people who frequent this thread.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|New Product||OSD PRO from Eagle Tree (RTH, AHI, Waypoints, Variometer, Voice, now shipping)||billpa||FPV Equipment||11347||Mar 07, 2015 08:00 AM|
|Discussion||Wind and the Eagle Tree RTH||hornant||FPV Talk||21||Apr 08, 2013 08:24 AM|
|Help!||Eagle Tree RTH ZII issue ?||hotdog1||FPV Talk||9||Oct 24, 2012 10:59 PM|
|Discussion||Where can I find RTH Manual Eagle Tree OSD pro?||rapghsi||FPV Talk||3||Oct 04, 2010 02:11 PM|
|Discussion||Need help with Eagle Tree OSD RTH!||Ellis108||FPV Talk||2||Nov 30, 2009 10:28 PM|