Originally Posted by guy1a

hi, just got my new OSD today .. i have this RX and i have not much understanding ...

what does it mean that the output is buffered ? do i have to do something about it ?
can i just iron a wire from this pin to the coresponding pin in the osd ? sould i do anything else other that that ? is there a (-) rnd wire too ?

thank you !

~~~~~
update:
i did it .. but i get reading of 0.3 ~ 0.6 on my OSD .. is it normal ?


Guy

Hi,
I've same probleme with Orange Rx:
0.28V Tx Off and 0.60V Tx On
Have you a solution?
Thanks

Fabrice

Originally Posted by jbsmith78

Good morning, I was looking for this pinout info for a Futaba R127DF - any help would be awesome!! Thank you!!

Did you ever figure this out and get RSSI out this Rx?

Hi everybody, i'm helping a friend to get rssi output from his jr rx 649. Anybody can help us?

I also do get only 0,1v ( no Signal) to 0,35 v Full Signal with the futaba Orange Receiver.

Ok, I did it. But now there's a problem to resolve.

On my futaba 617fs I can read 2.2 but any reading on my E-OSD from HK. Why does this happen?
It can read any voltage from one only AA battery(1,2), 1 lipo(3,7) and other low voltage. But when i plug the rssi (I can read 2,2 with my voltmeter at the plug) connector, i got no reading...

Do I need to do any other thing?
Thanks

Is any one succeed grap rssi signal any spektrum receivers or spektrum orange recevers? I specially want know have 9ch orange rx rssi pin?

does anyone know if RSSI out is possible for the Multiplex RX-7-Synth DS IPD? from what I've read it isn't...

if not, can anyone recommend a good 35MHz receiver with rssi?

Originally Posted by Fabweb

Hi,
I've same probleme with Orange Rx:
0.28V Tx Off and 0.60V Tx On
Have you a solution?
Thanks

Fabrice

Need not a filter, you need an amplitude detector.
0.1V Tx Off and 1.95V Tx On
Sorry for the terrible picture.

So, can anyone post values of RC filter components for FrSky V8FR-II receiver? Or any other FrSky one? Guessing them wouldn't be too productive...
Now I use super simple mini OSD from HK, but I'll buy EagleTree soon.

I have the same equipment...what sort of range do you get with the 9303 and JR scanselect receivers?

Originally Posted by workshop

ANY JR SPCM receivers with RSSI?

This is heartbreaking as I really want to keep using my JR9303 for FPV work as I am getting such good range, etc.

Does anyone have any ideas/solutions ??? Thanks.

Jeff

anyone knows the value of this capacitor??

Originally Posted by Red-Rx7

I just converted one of each. The pins are in the exact same location for both, although the 5114 has newer and some different chipsets.

Here are some pictures and a video of it working:

http://www.youtube.com/watch?v=AvtBSiP8MEw

Why you are using 100K resistor for R5114DPS?

I have this kind of receiver Fr6ch_D6FR. Have this receiver RSSI pin?

Has anyone found the RSSI pin for Futaba R6208SB receivers? I've been scouring the internet and I've poked and prodded with a DMM pretty extensively but I can't find it for the life of me.

Originally Posted by khaled_abobakr

Hi ..

Does any one know where the RSSI pin on the Futaba R6208SB

http://www3.towerhobbies.com/cgi-bin...?&I=LXAVCR&P=V

I did search this forum .. but I didn't find it.

Thanks a lot for your help

Khaled

Me too ... and so is Sharonx .... nothing yet

Khaled