Portchester Nr Portsmouth, Hampshire UK
Joined Nov 2006
An older flying buddy wants to get a 3DX SAS on 3S22002P Lipo's, but is having trouble getting the Motor/ESC combo.
Loking around in UK I found this at BRC is there any reason for it not to fit (main shaft having to be reversed first NOTE he will be using about 1700/1800 headspeed and is to be used fory vERY mild training/sport flying this is to be sed with a HI-Model 60A PRO ESC at £40:-
HiModel Max-BL2820-07 (500W) 919Kv Brushless Outrunner Motor. brc087
NEW! HiModel Max-BL2820-07 919KV 500W (Plus) Brushless Outrunner Motor supplied with, Alloy Motor Mount & 3.5mm Gold Connectors
A very Powerful brushless outrunner motor capable of producing up to 500W (plus) making it ideal for larger electric models or IC conversions around .40 size.
BRC HOBBIES provide a free PROP DATA SHEET with each motor (unlike many sellers) to give you an idea of what prop size to use depending on your flight battery.
* Voltage: 3-4S Li-Poly
* RPM/V: 919kv
* Cont Current: 35A
* Max Current: 45A
* Dimensions: D38 x L46.9mm
* Shaft diameter: 5mm
* Weight: 145g
* Motor Shaft: 5mm
* Recommended prop (no gearbox): 11-12 inch
* Motor Mount: Included
* connectors: 3.5mm Included
* Recommended model weight: 800-2400g/5.1 lb
We were very impressed with the power of this motor when we tested it on 3S (11.1v) which also helps keep the cost of the project down.
A very powerful brushless motor capable of 500W (plus) powering models up to 2400g or 5.1 pounds!
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||3dx motor mount,3 degrees?||barebower||3D Flying||4||Mar 18, 2006 06:43 AM|
|Which 3DX motor?||Scott MacAfee||3D Flying||1||Mar 08, 2004 12:14 AM|