|Jun 26, 2013, 02:24 PM|
Joined Feb 2012
Help - First HK Purchase Motor & ESC for scratch builds
I have been reading and reading on the scratch builds and have built a Nutball and will be building a 33 or 42" BB next 3channel then 4. I plan on building the ExpAir Noob Tube and Axion, along with other plans on this great site.
I am a noob and have not flown for many many years.
I am ordering my first motors and ESC from HK this week and I wanted some input from the crowd.
I was thinking of 4 motors with ESCs. So that I can fly & crash many different planes without having to switch motors around all the time.
I was orginally thinking of getting the
Turnigy 28 series - 2200, 1450, & 1000kv and the smaller 28-22-cq
I was going to get Plush 18A for the 24g motors
Turnigy TY-P1 25Amp HEXFET Brushless Speed Controller
TURNIGY Plush 30amp Speed Controller
Now I am thinking of getting a few different models to find out which ones are better than others, though with as much reading I do before I purchase I dont think any of these are bad choices.
maybe two of these hexTronik 24gram Brushless Outrunner 1700kv
as many planes on this site use it.
Turnigy Aerodrive SK3 - 2122-2100kv Brushless Outrunner Motor something different
Turnigy 28 - 2200kv and 1450kv larger motors for the larger birds.
I have just purchased 900mah 2s & 3s and 2200mah 3s batteries to work with.
Any and all feedback on motors and ESCs would be appreciated.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Help! First build, need some help with ESC/KK2 board||viskelaer||Multirotor Electronics||11||Mar 06, 2013 06:23 PM|
|Discussion help with first scratch build - firmware help||dubzn1||Multirotor Talk||6||Feb 24, 2013 05:25 PM|
|Discussion First Scratch build - ESC/motor problem...help please||dmanmtl||Power Systems||3||Feb 23, 2013 06:04 PM|
|Help! First F22 scratch build and burned motor||68 stang 19||Foamies (Scratchbuilt)||9||Feb 11, 2013 10:05 PM|
|Discussion From Scratch Build, looking for electronics help||k2spy04||Multirotor Electronics||1||Jan 04, 2013 10:14 AM|