Thank you everybody for your help. My Turnigy has the er9x firmware on it. I have successfully bound it to the v911 Rx. Can anybody help me out with setting it up? Right now the rudder and throttle are switched.

Originally Posted by Mulder_

Not is the correct bind procedure.

• switch on Tx
• switch on heli
• press the bind button on Tx while heli LED flashes fast
• restart Tx and Heli

you can always build a kit and put your own receiver in. I also fly the Xieda 9958 with it, but its just another micro heli.

• one remote to rule them all
• more control over dual rate
• mixers
• better range (over stock Xieda 9958)
• longer sticks than stock v911 remote (finer movements)
  
  

I would add that even:

• subtrim
• trim memory of all chanel
• expo
• timer
• throttle hold

Correct bind procedure:

• Push and hold bind button on TX while switching it on.
• Plug the battery in the helicopter (wait the red Led slow flashing)
• Switch off heli
• Switch off Tx
• Turn on Tx
• Turn on heli

Bind is finish

Hi, i've seen that most of you had great experience with banggood.com. Unfortunately I wasn't that lucky. Basically the problem is they sell goods they don't have on stock apparently.
Order status:

Date Added Status Comments
2012-01-03 12:26:10 Payment Confirmed
2012-01-03 21:13:54 Ready To Process
2012-01-03 23:31:13 Processing
2012-01-06 02:25:39 Contact Customer
2012-01-06 02:25:40 Back Order

Despite status that says they tried to contact me on 06.01 first email from them came on 11.01:

Hi Dear Customer,

I am really sorry for the delay of your order. cause most part items in
your order is out of stock at the moment, would you please change it
to other same value items? thanks.

Unavailable items:

SKU026043][SKU026026][SKU026041][SKU026024][SKU026029][SKU026028]

Looking forward to your soonest reply.

Ok, I thought - let's grab few batteries instead:

Please send these parts instead:
3x SKU026090
2x SKU026137

They don't have even batteries however their website didn't mention anything about this.

Hello,

Really sorry for the delay.

But this two item are also out of stock now, would you pls choose the other itmes?

OMG... again?? I am dealing with an idiot? Forget it, i want a heli at least...

Hey, how the heck i can figure out what's in stock and what is not?
You should update your website accordingly to avoid such situation or
at least propose something. I may keep trying to order anything
forever. If you are not able to fulfill my order just refund the
remaining amount to my Paypal account - that's it.

Apparently i wasn't polite enough to deserve for my own v911 from banggood.com:

Hi Dear Customer,

I am sorry for the delay of your order.

This item in your order is out of stock at the moment.we
can't repenlish it at the moment, cause factory is closed
to prepare for their China Tranditional Spring Festival.

We would like to give you a refund first, hope you can
understand.

Happy new year!

What? It's just ridiculous. I've got enough. I'm done. It was my first and last time i've done business with banggood.com.

It's actually very simple, both these resellers (banggood, myrcmart) doesn't have neither 911 nor it's parts on THEIR stock.

They order directly@factory then resend to us - that explains extremely long processing times.

Also the quality of products after New Year could be a little bit different (new year work force roll over, have personal experiences with that !)

Whole China is now preparing for new year festival, it's a very big turmoil over there so you just need to be patient.

I believe if smth is out of stock@myrcmart it's also out everywhere else (they just update the website quite often, not like others ...)

Originally Posted by jjacks

Hi, i've seen that most of you had great experience with banggood.com. Unfortunately I wasn't that lucky. Basically the problem is they sell goods they don't have on stock apparently.
Order status:

Despite status that says they tried to contact me on 06.01 first email from them came on 11.01:

Ok, I thought - let's grab few batteries instead:


They don't have even batteries however their website didn't mention anything about this.



OMG... again?? I am dealing with an idiot? Forget it, i want a heli at least...



Apparently i wasn't polite enough to deserve for my own v911 from banggood.com:



What? It's just ridiculous. I've got enough. I'm done. It was my first and last time i've done business with banggood.com.

Hi,

We are really sorry to make so many inconvences to you.
and the tone our customer service staff speak to you is not polite,sorry for that.
What shafte said about is right,the whole China is now preparing for the New Year,many workers in the factories goes back home now,and some parts you want are out of stock now,we have updated some information on the top of the website about the New Year.

Hope you can understand it.

Thank you.

Aaron

Originally Posted by Border Lord

Hi Guys

Had a V911 on order from Banggood since Dec 28th. It shows having shipped from Banggood on 29the Dec, but nothing since.
I did e-mail the company, and got a reply from a very nice lady called Abby.
She directed me to another website for International Mail Shipping.
On the rare occasions I can get anything on this site, all I see is it arrived at
'transit office of exchange' in Gangzhou on 5th January, and has not moved since.
I notice others seem to be able to get much better tracking information, and was wondering where else I could look.
I appreciate these things take time, but I would like to see some progress being made.
I did e-mail Banggood again on the 12th but no reply as yet.
Anybody got any ideas?

Cheers

Border Lord

Hi,

When you refer to the USPS,and it may say left Hong Kong ,that means your package is on the way now(left Hongkong),but the USPS tracking system sometimes would not show any info while it was during the transportion.
Only when the package arrives to your homeland and it wil showall the tracking info. ,sorry for my poor English,I don't know if you can get what I mean,hehe

Originally Posted by adjangs

Dual rate essentially means control authority that has two modes: fast and slow.

Exponential means the control throw can be tweaked to be very fine toward the center and increase in authority exponentially as the control stick reaches the end of its travel.

Thanks for that reply, that really helps. There's a lot to absorb here and I appreciate all the help I've received.

Originally Posted by Thx1326

Can anyone verify / confirm for certain if either of these two batteries will fit in the v911 copter and battery charger?

http://www.hobbyking.com/hobbyking/s...dproduct=19419

and

http://www.hobbyking.com/hobbyking/s...dproduct=18792

I'm very curious about this

Originally Posted by Aaron qin

Hi,

We are really sorry to make so many inconvences to you.
and the tone our customer service staff speak to you is not polite,sorry for that.
What shafte said about is right,the whole China is now preparing for the New Year,many workers in the factories goes back home now,and some parts you want are out of stock now,we have updated some information on the top of the website about the New Year.

Hope you can understand it.

Thank you.

Aaron

Aaron, I hope it will be bather with shipping and spares parts - btw jjacks is not alone

Originally Posted by csomi2

I would add that even:

• subtrim
• trim memory of all chanel
• expo
• timer
• throttle hold

Correct bind procedure:

• Push and hold bind button on TX while switching it on.
• Plug the battery in the helicopter (wait the red Led slow flashing)
• Switch off heli
• Switch off Tx
• Turn on Tx
• Turn on heli

Bind is finish

our boards must work different. The bind procedure I posted is the only one that worked for me. the sequence you posted does not work for me. It is however the standard procedure that also works with my xieda 9958 but it does not work with my v911.

have been to the park. there was nearly no wind but still enough to give the v911 a hard time. some pics:


















its quite hard to focus on this tiny thing when it zips through the air.

Nice photos. Handsome little Heli. Were you flying and talking the photos at the same time?

Originally Posted by Mulder_

have been to the park. there was nearly no wind but still enough to give the v911 a hard time. some pics:

its quite hard to focus on this tiny thing when it zips through the air.

Excellent photography! They're all good but I especially like the 4th.

Originally Posted by Mulder_

have been to the park. there was nearly no wind but still enough to give the v911 a hard time. some pics:



















its quite hard to focus on this tiny thing when it zips through the air.

Great Pics! Thanks for sharing...

Originally Posted by csomi2

I would add that even:

• subtrim
• trim memory of all chanel
• expo
• timer
• throttle hold

Correct bind procedure:

• Push and hold bind button on TX while switching it on.
• Plug the battery in the helicopter (wait the red Led slow flashing)
• Switch off heli
• Switch off Tx
• Turn on Tx
• Turn on heli

Bind is finish

I would add that the stock V911 tx remembers trims too.