HobbyKing.com New Products Flash Sale
Closed Thread
Thread Tools
Old Dec 30, 2007, 02:33 PM
billpa's Avatar
Joined Nov 2003
4,921 Posts
FAQ
What to do if your current sensor is reading incorrectly

If your eLogger or Data Recorder Electric Expander current sensor is inaccurate, what may be happening is that your setup has a steady non-zero draw after powerup. We're seeing more and more of this with larger ESC's/Motors.

To fix this, simply install th Eagle Tree Windows application version 5.66 or later, and click "Tools, Rezero Current Sensors."

This works with our eLogger, our Electric Expanders, and our new Servo Current Sensor. It is especially useful with the Servo Current Sensor, since servos draw a small amount of current even when they are not moving.

Just make sure that there is no current draw through the sensor when doing the Rezero. Also make sure that you have a battery connected to your eLogger during this step.

NOTE: All eLogger V3 units are shipped with the zero current pre-calibrated, so this step should not be necessary.
billpa is online now Find More Posts by billpa
Site Sponsor
Sign up now
to remove ads between posts
Closed Thread


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion O.T. What to do if your F-22 canopy fails. Kevin Cox Electric Ducted Fan Jet Talk 1 Apr 24, 2006 09:38 AM
What do you do if your frequency isn't open? psycho_klown66 Beginner Training Area (Aircraft-Electric) 13 Oct 19, 2004 10:42 AM
What to do with your new Phx 10 Shawn Palmer Castle Creations 0 Oct 21, 2003 02:16 PM
What to do with your ACE Simple series Wing Cybear_GBG Parkflyers 14 Aug 24, 2003 02:58 AM