|Mar 22, 2015, 03:20 PM|
high end noise on Alloy EDF
I just bought two Lander 70mm 10 blade alloy fans with 3300Kv motors. While testing them they both ran fine up to about 1/2 throttle when they began a type of pulsing! I would not call it a definite vibration, more of a rev up, drop back, rev up, drop back thing...the revs lasted about 1/2 second each..about one 'plulse' a second.. Did this to full throttle! Both fans did the same thing...even used different ESCs... same thing. I did balance the fans, they were out a little ,but still doing this at above half throttle.. I am using 4s 4000mHa batteries..
|Mar 22, 2015, 04:04 PM|
Joined Jun 2012
Are your batteries fully charged and/or old? As you add power the batteries' voltage will sag/drop and you may actually be hitting the LVC, and the 'pulsing' is deliberate to warn the pilot he is running out of electrons. Either that or the LVC setting on your ESC's might be too high?
Maybe try other batteries? Good luck...
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Question||How important are high end servos on a nitro plane?||Vaeloron||Fuel Plane Talk||6||Oct 31, 2013 04:25 PM|
|Sold||HET (High End Technology) 2W-20 70mm EDF $65||MickeyD||Aircraft - Electric - Jets (FS/W)||0||Sep 27, 2013 11:23 PM|
|Discussion||Correction on High End comment....more on Xplorer||marios||Multi Task F3X||3||Jul 06, 2009 01:16 PM|
|Sold||FA-18 Hornet EDF Kit by High-end Technology holland||MT4 Display Only||Aircraft - Electric - Jets (FS/W)||3||Mar 14, 2009 09:07 PM|
|Discussion||Batteries for high end EDFs||dusmmdb34||Electric Ducted Fan Jet Talk||10||Jan 10, 2009 08:39 PM|