Here is one of my Scratchbuilt I titled, Mini-Mollie.

Specs:

AUW : 1kg
Battery : 4s 2200mah
Motors : RCTimer 2830-8 1300KV
ESC : RCTimer 30amps flashed with SimonK firmware
Flight Controller: MultiWiiCopter version 2.1

MiniMollie MWC 2.1 Upgrade (1 min 45 sec)

Originally Posted by rimshotcopter

Here is one of my Scratchbuilt I titled, Mini-Mollie.

Very nice- I like it. I can see where the fore/ aft CG would have to be set pretty carefully on this type of design.

Rick

Originally Posted by 2400RDR

Very nice- I like it. I can see where the fore/ aft CG would have to be set pretty carefully on this type of design.

Rick

Thank you Rick, here is a little margin for error but not MUCH.

foldable H quad, built with spare alu squares, 5mm plywood as plates. 60cm mtm distance.
Emax Gt2215/09 motors, flashed esc, 9x4.5 apc props, 4s lipo, AQ50 Pro flight board.





fits easily in my scooter case



here's first test flight

AQ50 H quad (4 min 40 sec)

Originally Posted by thepelell

foldable H quad, built with spare alu squares, 5mm plywood as plates. 60cm mtm distance.
Emax Gt2215/09 motors, flashed esc, 9x4.5 apc props, 4s lipo, AQ50 Pro flight board.

Very nice. Your video is so smooth.

Originally Posted by bmoke

Very nice. Your video is so smooth.

thanks, i train a lot to be as smooth as possible.. .and the AQ50 is a very good board for smoothness.

Rimshotcopter,I really like what you've done here.Very cool! I think the canopy and tail set off your copter. Flies nice too!

Originally Posted by tippytoe

Rimshotcopter,I really like what you've done here.Very cool! I think the canopy and tail set off your copter. Flies nice too!

thank you, she has seen many revisions but I believe this is the last one.

When the quad bug bit me, I wanted to do something different and decided to give it a try using SPAD building methods. First one was named the "correXcopter" which was a 100% SPAD frame with 4mm triangular coro booms and 6mm plates in the middle. Being a first timer, couldnt do much at the "flying your quad" side. Mean time saw the flitetest clip of Hcopter. Next up was to build the "cooreHcopter" . Though crashed many times, got used to it and am in love with these bugs now. Pics and videos below.

correXcopter:

Corrocopter Maiden (1 min 36 sec)

correHcopter:

correHcopter Thursday flight (3 min 33 sec)

Build log at http://spadworld.net/forum/viewtopic...ht=corrocopter

My foldable quad built for travelling.
62 cm MtM
35cm x 18cm (folded)
1380g auw
11" prop

Originally Posted by JEGO88

My foldable quad built for travelling.

Very interesting for a first post.
I like very much your concept and your construction.
Congratulations.

Originally Posted by Mortimer

Very interesting for a first post.
I like very much your concept and your construction.
Congratulations.

Thanks Mortimer. I got the idea from the H-frame and
adjusted the lenght to make it as compact as possible.

JEGO88 Your quad looks nice and compact. I would maybe try and go a step further and make the landing gear foldable somehow?

Here is my latest scratchbuild quadrocopter, it is made for fpv and lifting a gopro.it is a little one, motor to motor is about 37cm.

it is made of 2mm alu plates and 13x13mm alu arms. the frame weight about 280grams.my AUW is 1250grams

my setup is written under the videos: here are some

that how my little one flies,

fpv-rüzgarsız bir gün (6 min 36 sec)

and this is with the 127 degree angle, no props on the video

fpv-gopro 2 on 1080p medium FOV (no props in sight) (3 min 4 sec)

Here's mine.