|Jan 01, 2013, 07:47 PM|
CellPro 4S w/A123 charging LiFe packs
I've got an old CellPro 4S w/A123 that I've been using for a long time charging LiPo batteries.
I've recently starting flying bigger gas planes and have two receiver packs. With the bigger digital servos we are using the LiFe 2s 6.6V packs. I'd like to use my charger but have some concerns/questions.
I've been told the LiFe batteries are the same as A123 batteries and know that my CellPro 4S will charge A123 but not at the voltage I would expect. At 6.6V, that's 3.3V per cell but the CellPro 4S documentation says that it charges at 3.6V per cell. Does this mean I cannot use my CellPro 4S to charge these LiFe packs?
Thanks for the help.
|Jan 01, 2013, 08:09 PM|
I think you may be confusing nominal cell voltage (3.3v) with per-cell charge voltage (normally 3.65v for A123 and LiFePO4). You should be fine using the A123 preset.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Wanted (X3) FMA CellPro 4S with A123 chargers||steve1814||Aircraft - Electric - Batteries & Chargers (FS/W)||4||Oct 07, 2012 08:50 AM|
|Sold 7S A123 Battery & Cellpro 4S 4 Amp ( A123 Version ) Charger w/Thunderpower Adapters!||helinut4ever||Aircraft - Electric - Batteries & Chargers (FS/W)||0||Mar 08, 2009 10:13 AM|
|Sold FMA Cellpro 4S Charger (3A) w/ upgraded OLED display and A123 Battery Charging||MrRetro||Aircraft - Electric - Batteries & Chargers (FS/W)||0||May 06, 2008 10:42 PM|
|Discussion Cellpro 4s or Cellpro 10s for charging multiple packs??||windisevil!!||Batteries and Chargers||16||Mar 25, 2008 03:57 PM|
|Discussion Which charger is better for A123 batteries? -- A123 Sonic Charge or FMA CellPro 4S||novastar||Mini Helis||8||Aug 30, 2007 08:56 PM|