|Feb 23, 2013, 11:01 PM|
Huntington Beach CA
Joined Jan 2008
Covering foamies with clear (to preserve the existing paint or decals)
I am looking to cover my Trojan T-28 (and maybe some others later) with some type of laminate to add strength. I am familiar with the packing tape method but would like something a bit nicer looking. I have read many threads on covering foam planes with the various "kote" products and the consensus seems to be that Monokote sets at too high a temp. The others (e.g. Econokote, Towercoat, UltraCote, etc) seem to be preferred. However I am running into difficulty finding clear film. I have only found Hanger9 UltraCote to have clear, but only 6-ft rolls.
I'd like to hear any thoughts or suggestions on the best material to use, keeping in mind that I am not looking to add color (e.g. I have a Hawker Hurricane that might like some "clear coat" for added strength too).
|Feb 26, 2013, 05:28 PM|
I have too much work to do to respond correctly, but look at Black Baron Trim Film, Ultra lite or something? Lo temp for foam, I think best could be the poly-thane, it can be thinned and is light, spray cans unless warmed are iffy.....more later...
|Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion foamcore foamies with decal printed||samwei1950||Foamies (Scratchbuilt)||1||Feb 14, 2013 08:07 AM|
|Discussion Help with an existing paint job||rblubaugh||Dock Talk||2||Jul 20, 2012 09:05 AM|
|Nite flying.. Clear covering or not?||Tram||Parkflyers||5||Oct 16, 2005 01:39 AM|
|Clear paint for foamie||gquiring||Foamies (Kits)||1||Aug 16, 2005 08:16 PM|
|Clear covering over painted balsa surfaces?||Cycletherapy||Electric Plane Talk||13||Jan 20, 2005 09:39 AM|