Walkera Genius Cp Indoor 3D plus blade scraping (3 min 46 sec)

Walkera Genius Cp Flight Clips (3 min 55 sec)

Walkera Genius Cp Brushless 3D In Garage P2 (2 min 11 sec)

Walkera Genius Cp (1 min 10 sec)

This is a cool video of some night flying by: txipicopter1

devention 12 genius cp 3D flight outdoor in the night, GoPro Hero2 (4 min 36 sec)

Cool vid by helicrazee

Genius cp brushless (1 min 26 sec)

Originally Posted by Fraggle_Corp

Hi,

For definitivly fix the wires fraying and use all types of connectors you need, i recommend this modification :





maybe like the new rx version, im not sure about fonction of that new connector :
http://www.rc711.com/shop/24g-walker...65_122_292_294

Regards

Hope yall can benifet from these videos and pics

Originally Posted by benmlee

Anyone noticed that Walkera came out with a new receiver for the DEVO Genius. Old one was RX2625H. New one is RX2631H-D. The main difference is there is an extra unused connector on it. Possibly used for the bind plug?

The wire is coming out of the bottom instead of the top.

Thats pretty cool maybe they are starting to improve this heli

If you want specific videos up just let me know and I will post them

Enjoy yall

Happy new years

Farmer

Nice video and where did you get the motor from? Is that the 15000+KV motor it has more power than C05. Details please.

Originally Posted by vronny

Nice video and where did you get the motor from? Is that the 15000+KV motor it has more power than C05. Details please.

yeah its the 15000+ kv it has more pop then the c05 and 30+ seconds flight time then the c05 with stock battery. I bought it from oversky.com with 7 8 & 9 t pinions. 7t worked best for me ill post better video tomorrow morning

for some reason with the 7t pinion runs loud lol
and thanks

Farmer

If you hold the heli in your hand and throttle up do you notice more vibes when using the 7t pinion?

Originally Posted by f.a.r.m.e.r

yeah its the 15000+ kv it has more pop then the c05 and 30+ seconds flight time then the c05 with stock battery. I bought it from oversky.com with 7 8 & 9 t pinions. 7t worked best for me ill post better video tomorrow morning

for some reason with the 7t pinion runs loud lol
and thanks

Farmer

do you see any cogging at all with the 7T pinion on either C05 or 03s ? any idea of the head speeds

Regards David

Originally Posted by f.a.r.m.e.r

yeah its the 15000+ kv it has more pop then the c05 and 30+ seconds flight time then the c05 with stock battery. I bought it from oversky.com with 7 8 & 9 t pinions. 7t worked best for me ill post better video tomorrow morning

for some reason with the 7t pinion runs loud lol
and thanks

Farmer

So you used the same CB100 ESC of course it feels lighter it only is 3g with much higher HS 15800kv compare to 11500kv. No problem installing in frame. I was waiting on HP05-2 13500kv but this has more power
but a larger motor shaft 1.5mm. So where did you get the gear?

Originally Posted by buster7467

If you hold the heli in your hand and throttle up do you notice more vibes when using the 7t pinion?

not really any more vibes then stock just louder.

edit

sorry I was wrong it does vibrate more then stock with the canopy on but its not so much where it messes with the gyro.

canopy off I can feel little vibes. imho nothing that will create problems

Farmer

Originally Posted by vronny

So you used the same CB100 ESC of course it feels lighter it only is 3g with much higher HS 15800kv compare to 11500kv. No problem installing in frame. I was waiting on HP05-2 13500kv but this has more power
but a larger motor shaft 1.5mm. So where did you get the gear?

I got the pinions from my local hobbyshop aeromicro.com

you still have to drill them out to fit the hp03s shaft.

no problems inastalling

farmer

So i take it you can't use the stock pinion with the 03 motor? And where did you get the pinions from?


edit: Sorry i was just a couple minutes late asking. lol

Originally Posted by buster7467

So i take it you can't use the stock pinion with the 03 motor? And where did you get the pinions from?


edit: Sorry i was just a couple minutes late asking. lol

I got mine from here..


http://www.homefly.com/products.asp?id=36

Originally Posted by Hellraser

do you see any cogging at all with the 7T pinion on either C05 or 03s ? any idea of the head speeds

Regards David

my c05 cogged alot. my hp03s coggs alittle with 8t but best performance for me stock battery 7t pinion 5921 head speed at 100% flat throttle curve.

Farmer

Originally Posted by livonia bob

I got mine from here..


http://www.homefly.com/products.asp?id=36

I ordered some from them also waiting to get here.

Originally Posted by livonia bob

I got mine from here..


http://www.homefly.com/products.asp?id=36

iv never ordered from them im going to give them a try

@livonia bob what you running on your heli?

Originally Posted by f.a.r.m.e.r

my c05 cogged alot. my hp03s coggs alittle with 8t but best performance for me stock battery 7t pinion 5921 head speed at 100% flat throttle curve.

Farmer

Thanks I ave a C05 I am thinking of using just wondering what pinion to use - wondered if a 7T would work without too much cogging - with a 6K headspeed hows the stock tail holding up ?

Regards David

Originally Posted by f.a.r.m.e.r

my c05 cogged alot. my hp03s coggs alittle with 8t but best performance for me stock battery 7t pinion 5921 head speed at 100% flat throttle curve.
Farmer

I was looking for something alittle stronger than the C05 which already have. So no problem with the install just drop fit.