|Mar 01, 2012, 08:07 PM|
DiaLFonZo-Copter Crazy2Fly Quadcopter 340mm
Lynxmotion Crazy2Fly Sport Quadcopter frame (Designed by DiaLFonZo)
Here is the new baby... !
Not cut yet but i like it already...
- 340mm Between motors
- 45mm and 30.5mm flight controller mounting hole
- Motor up to 30mm can (not real.. the hole in the top arm is 30mm so anything smaller)
- Can swing 8" prop
- Top and Bottom protect plate
- Batterie slot on the bottom center plate for Hook and Loop
HD Here and Here
For people who know my TrinitY Quad 430mm here is a comparaison in size
|Mar 04, 2012, 09:29 AM|
DiaLFonZo-Copter Crazy2Fly first cut on MY CNC
Hi All... !
Just cut the frame this morning.
This is the first project i cut on my CNC after it's back from the "Update"..
Cellular pictures... so..
HD Here and Here
HD Here and http://farm8.staticflickr.com/7045/6...74d41988_o.jpg
|Mar 04, 2012, 09:55 AM|
|Mar 04, 2012, 10:07 AM|
Wooooooweeee that came out nice eric very clean...sweet frame...HEHEEHE. those arms are perfect for different kinds of outrunners they can be reversed for mounting especially like the turnigy, eflite 300's or the keda's
|Mar 04, 2012, 10:12 AM|
United States, NV, North Las Vegas
Joined Sep 2009
Eric, yet another nice looking frame I wonder how this would fly with the set of park 300's I happen to have just sitting on the bench
I'm thinking a nice light controler like a mini MWC or CC board... micro receiver... 2's 1500mah or so... the park 300's and 8x4 props will make a sweet little quad for the back yard!
let me know when your ready for a production run
|Mar 04, 2012, 11:36 AM|
Joined Jan 2010
|Mar 05, 2012, 07:56 AM|
Just weighted this morning.. but it's all assembled now.
Only battery missing
Look like 450g
DiaLFonZo-Copter Multiwii shield with FreeIMU 3.5 MS
Aluminum standoff all around
|Mar 05, 2012, 08:04 AM|
With the LED on the flight controller it look even better.
I will try to add other LED too on arms..
To let everyone know:
60$ + Shipping for the Aluminum standoff kit
55$ + Shipping for the Nylon standoff kit
Both kit include all screws needed.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|New Product||DiaLFonZo-Copter - Flight controller shield||Dialfonzo||Multirotor Talk||263||Feb 10, 2014 12:38 PM|
|Discussion||DiaLFonZo-Copter MicroQuad V2 (170mm MtM)||Dialfonzo||Multirotor Talk||137||Aug 14, 2013 05:25 AM|
|Build Log||HEXorcism 600 - Luis & DiaLFonZo-Copter - Design for Cyberdog||Dialfonzo||Multirotor Talk||77||Apr 08, 2012 10:52 PM|
|Discussion||DiaLFonZo-Copter TrinitY Quad V2.0||Dialfonzo||Multirotor Talk||316||Mar 12, 2012 04:46 AM|
|Discussion||FPV plate Soft mounted - Luis & DiaLFonZo-Copter||Dialfonzo||Multirotor Talk||5||Jan 05, 2012 12:04 PM|