Hi there netherlands people

eitanro · Mar 19, 2006, 11:14 AM

I'm from Israel (originally born in Lithuania),
went to a trip to your country (mostly Amsterdam, but also visited in "Walibi" was great!!), any way I fell i love in this amazing country and cool people, and thought to move there...
My profession is to build UAV's with composites, maybe any one can help me find a Job there?

Thanks
Eitan

Extreme3D · Mar 20, 2006, 03:52 PM

There aren't a lot of aerospace manufacturers here.

eitanro · Mar 20, 2006, 04:22 PM

I know.... but maybe one them will accepct me?

Extreme3D · Mar 24, 2006, 05:40 PM

I guess you'll have to try to get a job BEFORE moving over here.

eitanro · Mar 25, 2006, 06:47 AM

Thats what i'm trying to do here :-)

CrashingDutchman · Aug 22, 2006, 10:14 AM

This forum is really quiet

If you are still looking for a job, you could check this site:
http://www.fokker.com/page.html?ch=DEF&id=5788

johnnygroeneveld · Oct 24, 2006, 04:39 PM

Hi,
I am from holland and i am a new member in this forum.
I went to a trip to your country ( Mostly eilat, but also went to jeruzalem, and did swim in the dead sea (very cold).

Pedro#1 · Nov 05, 2006, 02:12 PM

Or try ESA noordwijk Nertherlands.
http://www.spaceexpo.nl/gen_content.asp?PageID=53
http://www.esa.int/esaCP/Netherlands.html

Three ESA people live in my neighborhood.
Two are English and one is a German.
Succes

Alexkvw · Nov 10, 2006, 09:56 AM

Or Dutchspace, but off course these are all companies you could have found by urself as well. Sorry, don't have any inside contacts.

Ron van Sommeren · Nov 20, 2006, 03:52 PM

Stork produces for (a.o.) Airbus:
http://www.stork.com/page.html?ch=DEF&id=43

Vriendelijke groeten

Ron
• diy motor building tips & tricks
• diy brushless motor discussion group
• Drive Calculator download & discussion group
• int. E fly-in & diy outrunner meet, Aug.26 2007, Nijmegen, the Netherlands

eitanro · Nov 21, 2006, 09:24 AM

Thanks, but I didn't find any job for a composite materials (may be I haven't looked at the right places)....
may be you can help me with that a bit?
Thank you very much guys ,and sorry for bugging!
Eitan.

Ron van Sommeren · Nov 21, 2006, 11:50 AM

Stork produces the 'glare' composite that's used by Airbus. See 'Stork Aerospace'
http://www.stork.com/page.html?ch=DEF&id=1190

Vriendelijke groeten

Ron

eitanro · Nov 21, 2006, 12:12 PM

I sent them an E-mail... hope it will have results...
Thanks.

Ron van Sommeren · Dec 09, 2006, 09:23 AM

@eitanro
Well, when can we pick you up at Schiphol/Amsterdam Airport

?

Vriendelijke groeten

Ron
14th.int. E-fly-in, Aug.26, Nijmegen

eitanro · Dec 10, 2006, 03:57 PM

Unfortunately, they didn't even answer my E-mail...

so I have no ideas left....
may be the Netherlands weren't made for me.
Eitan

Nov 05, 2006, 02:12 PM	#8
Pedro#1 Registered User Join Date: Sep 2006 Posts: 3	ESA Noordwijk Or try ESA noordwijk Nertherlands. http://www.spaceexpo.nl/gen_content.asp?PageID=53 http://www.esa.int/esaCP/Netherlands.html Three ESA people live in my neighborhood. Two are English and one is a German. Succes Last edited by Pedro#1; Nov 05, 2006 at 03:51 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hi there	alibodin	Slope	13	Nov 05, 2006 02:05 PM
Hi there!	hetrodyne	Scale Boats	4	Mar 20, 2005 09:06 PM
Proof there are people crazier than I....	Paul Breed	RCSE	0	Dec 02, 2004 07:11 PM
HI there	Z00M	Mini Helis	2	Sep 09, 2004 03:02 AM
hi there	someone special	Parkflyers	1	Aug 05, 2002 03:04 PM

Mar 19, 2006, 11:14 AM	#1
eitanro Registered User Join Date: Sep 2004 Location: Tel Aviv-Yafo Ben Gurion, Israel Posts: 508	Hi there netherlands people I'm from Israel (originally born in Lithuania), went to a trip to your country (mostly Amsterdam, but also visited in "Walibi" was great!!), any way I fell i love in this amazing country and cool people, and thought to move there... My profession is to build UAV's with composites, maybe any one can help me find a Job there? Thanks Eitan Last edited by eitanro; Mar 29, 2006 at 04:08 AM.

Mar 20, 2006, 03:52 PM	#2
Extreme3D Team RC-TEK Join Date: Apr 2005 Location: Oegstgeest, The Netherlands Posts: 334	There aren't a lot of aerospace manufacturers here.

Mar 20, 2006, 04:22 PM	#3
eitanro Registered User Join Date: Sep 2004 Location: Tel Aviv-Yafo Ben Gurion, Israel Posts: 508	I know.... but maybe one them will accepct me?

Mar 24, 2006, 05:40 PM	#4
Extreme3D Team RC-TEK Join Date: Apr 2005 Location: Oegstgeest, The Netherlands Posts: 334	I guess you'll have to try to get a job BEFORE moving over here.

Mar 25, 2006, 06:47 AM	#5
eitanro Registered User Join Date: Sep 2004 Location: Tel Aviv-Yafo Ben Gurion, Israel Posts: 508	Thats what i'm trying to do here :-)

Aug 22, 2006, 10:14 AM	#6
CrashingDutchman Registered User Join Date: Oct 2004 Location: Amersfoort, Netherlands Posts: 1,071	This forum is really quiet If you are still looking for a job, you could check this site: http://www.fokker.com/page.html?ch=DEF&id=5788

Oct 24, 2006, 04:39 PM	#7
johnnygroeneveld knol Join Date: Oct 2006 Posts: 32	Hi, I am from holland and i am a new member in this forum. I went to a trip to your country ( Mostly eilat, but also went to jeruzalem, and did swim in the dead sea (very cold).

Nov 10, 2006, 09:56 AM	#9
Alexkvw Registered User Join Date: Sep 2006 Location: The Netherlands Posts: 19	Or Dutchspace, but off course these are all companies you could have found by urself as well. Sorry, don't have any inside contacts.

Nov 20, 2006, 03:52 PM	#10
Ron van Sommeren homo ludens modellisticus Join Date: Feb 2001 Location: near Nijmegen, Netherlands Posts: 8,674	Stork produces for (a.o.) Airbus: http://www.stork.com/page.html?ch=DEF&id=43 Vriendelijke groeten Ron • diy motor building tips & tricks • diy brushless motor discussion group • Drive Calculator download & discussion group • int. E fly-in & diy outrunner meet, Aug.26 2007, Nijmegen, the Netherlands

Nov 21, 2006, 09:24 AM	#11
eitanro Registered User Join Date: Sep 2004 Location: Tel Aviv-Yafo Ben Gurion, Israel Posts: 508	Thanks, but I didn't find any job for a composite materials (may be I haven't looked at the right places).... may be you can help me with that a bit? Thank you very much guys ,and sorry for bugging! Eitan.

Nov 21, 2006, 11:50 AM	#12
Ron van Sommeren homo ludens modellisticus Join Date: Feb 2001 Location: near Nijmegen, Netherlands Posts: 8,674	Stork produces the 'glare' composite that's used by Airbus. See 'Stork Aerospace' http://www.stork.com/page.html?ch=DEF&id=1190 Vriendelijke groeten Ron

Nov 21, 2006, 12:12 PM	#13
eitanro Registered User Join Date: Sep 2004 Location: Tel Aviv-Yafo Ben Gurion, Israel Posts: 508	I sent them an E-mail... hope it will have results... Thanks.

Dec 09, 2006, 09:23 AM	#14
Ron van Sommeren homo ludens modellisticus Join Date: Feb 2001 Location: near Nijmegen, Netherlands Posts: 8,674	@eitanro Well, when can we pick you up at Schiphol/Amsterdam Airport ? Vriendelijke groeten Ron 14th.int. E-fly-in, Aug.26, Nijmegen

Dec 10, 2006, 03:57 PM	#15
eitanro Registered User Join Date: Sep 2004 Location: Tel Aviv-Yafo Ben Gurion, Israel Posts: 508	Unfortunately, they didn't even answer my E-mail... so I have no ideas left.... may be the Netherlands weren't made for me. Eitan