Updated pinion list

TMorita · Feb 14, 2005, 05:16 AM

I've had a few people ask about pinions, so here is the updated pinion list.

This will be included in the EHBG v15.

Toshi

HPI Racing Micro RS4 steel pinions w/ss (2mm bore, 0.5 module):

9T (Tower Hobbies LXBGE5)
10T (Tower Hobbies LXBGE6)
11T (Tower Hobbies LXBGE7)
12T (Tower Hobbies LXBGE8)
13T (Tower Hobbies LXBGE9)

Duratrax Micro Street Force aluminum pinions w/ss (2mm bore, 0.5 module)
:

9T (Tower Hobbies LXFNC5)
11T (Tower Hobbies LXFNC6)
13T (Tower Hobbies LXFNC7)

Kyosho @12 steel pinion w/ss (2mm bore, 0.5 module)

7T (Kyosho AZW002-07, Tower Hobbies LXGPF2)
8T (Kyosho AZW002-08, Tower Hobbies LXGPF3)
9T (Kyosho AZW002-09, Tower Hobbies LXGPF4)

Team Associated RC18T steel pinions w/ss (2mm bore, 0.6? module):

11T (Tower Hobbies LXJHU0)
12T (Tower Hobbies LXJHT6)
13T (Tower Hobbies LXJHT7)
14T (Tower Hobbies LXJHT8)
15T (Tower Hobbies LXJHT9)

Align T-rex metal pinions w/ss (2mm bore, 0.5 module)

11T, 13T, 15T (HZ021)

Align T-rex metal pinions w/ss (2.3mm bore, 0.5 module):

9T, 10T, 11T (HZ020)

Team Losi Mini-T plastic press-on pinions (2mm bore, 0.5 module)

12T, 14T, 16T (LOSB1069)

Xray M18 composite pinions w/ss (2mm bore, 0.5 module):

13T, 14T, 15T, 16T (#385701)
17T, 19T, 21T, 23T (#385700)

Tonystott · Feb 14, 2005, 05:38 AM

You knew some dopey B would ask, didn't you

, but do you also have a list of the modules for the main gears on popular micro helis? EG GWS DF, Hummingbird, Aerohawk, Piccolo etc etc.

TMorita · Feb 14, 2005, 06:02 AM

I have most of them listed in the EHBG.

IIRC, they're all 0.5 module except for the Hornets, which are 0.4 module.

Toshi

theShark · Feb 14, 2005, 07:20 AM

HPI Pinion Gear 8T Steel Micro RS4 72480 (Tower Hobbies LXBGE4)

TMorita · Feb 14, 2005, 07:25 AM

Quote:

Originally Posted by theShark

HPI Pinion Gear 8T Steel Micro RS4 72480 (Tower Hobbies LXBGE4)

Thanks, missed that one - don't know why too, since I have three of them.

Toshi

Tonystott · Feb 14, 2005, 08:48 AM

Quote:

Originally Posted by TMorita

I have most of them listed in the EHBG.

IIRC, they're all 0.5 module except for the Hornets, which are 0.4 module.

Toshi

Bugger! I just knew I should have checked first! Sorry.

ScotY · Mar 15, 2005, 01:13 PM

Hey Toshi,

What about Align 3.2mm (1/8") bore pinions?

I guess I could list 1/8" pinions too.

How many teeth are they, and what's the part #?

Toshi

rotaryguy · Mar 15, 2005, 04:53 PM

www.allerc.com is selling .5 mod pinions now, a nice selection of tooth and shaft sizes, slip on style

Happy|Harry · Mar 15, 2005, 05:06 PM

toshi i think the RC18T pinions are .5 mod too as the RC18T pinions i just received have identical meshing to the RS4 pinions i have

. i have both set's of the x-ray pinions en-route too, what type of composite are they?

phil

averen · Mar 27, 2005, 04:53 PM

Any one know where I can find these X-Ray M18 pinions at?

Thanks!
Jared

Happy|Harry · Mar 27, 2005, 05:07 PM

the X-Ray pinions have to be my favoute of the 3 i have, the only downside is that in the 4 pinion pack you only get 1 set screw. www.rc-union.com has the 13T, 14T, 15T, 16T (#385701) in stock just now, but he's waiting on the 17T, 19T, 21T, 23T (#385700) to come back in stock, he is one of the cheapest sources i found for the X-Ray M18 pinions and is a pleasure to deal with

phil

averen · Mar 27, 2005, 05:13 PM

Phil,
Thanks for the link! I'll have to wait for the other ones to get in stock too

Have you tried drilling one of these out to a 3mm shaft?

Thanks!
Jared

will p3 · Mar 27, 2005, 05:23 PM

>.Align T-rex metal pinions w/ss (2mm bore, 0.5 module)

11T, 13T, 15T (HZ021)<<

Is that correct i can only find with 2.3mm bore?
thx for the info toshi

.

Happy|Harry · Mar 27, 2005, 05:27 PM

np jared

. i've not tried drilling them out but there is enough material to do it, as long as your accurate it should be ok. i'll take some macro pics of the pinions i have tomorrow so check back then to see what you think

phil

averen · Mar 27, 2005, 05:31 PM

I think it should work...drilling it out that is. I'll just put it on my drill press and hope for the best

I'll probably try it on a smaller pinion first, just in case

Jared

Feb 14, 2005, 05:16 AM	#1
TMorita Registered User Join Date: May 2002 Location: San Carlos, California, United States Posts: 7,513	Updated pinion list I've had a few people ask about pinions, so here is the updated pinion list. This will be included in the EHBG v15. Toshi HPI Racing Micro RS4 steel pinions w/ss (2mm bore, 0.5 module): 9T (Tower Hobbies LXBGE5) 10T (Tower Hobbies LXBGE6) 11T (Tower Hobbies LXBGE7) 12T (Tower Hobbies LXBGE8) 13T (Tower Hobbies LXBGE9) Duratrax Micro Street Force aluminum pinions w/ss (2mm bore, 0.5 module) : 9T (Tower Hobbies LXFNC5) 11T (Tower Hobbies LXFNC6) 13T (Tower Hobbies LXFNC7) Kyosho @12 steel pinion w/ss (2mm bore, 0.5 module) 7T (Kyosho AZW002-07, Tower Hobbies LXGPF2) 8T (Kyosho AZW002-08, Tower Hobbies LXGPF3) 9T (Kyosho AZW002-09, Tower Hobbies LXGPF4) Team Associated RC18T steel pinions w/ss (2mm bore, 0.6? module): 11T (Tower Hobbies LXJHU0) 12T (Tower Hobbies LXJHT6) 13T (Tower Hobbies LXJHT7) 14T (Tower Hobbies LXJHT8) 15T (Tower Hobbies LXJHT9) Align T-rex metal pinions w/ss (2mm bore, 0.5 module) 11T, 13T, 15T (HZ021) Align T-rex metal pinions w/ss (2.3mm bore, 0.5 module): 9T, 10T, 11T (HZ020) Team Losi Mini-T plastic press-on pinions (2mm bore, 0.5 module) 12T, 14T, 16T (LOSB1069) Xray M18 composite pinions w/ss (2mm bore, 0.5 module): 13T, 14T, 15T, 16T (#385701) 17T, 19T, 21T, 23T (#385700)

Mar 15, 2005, 01:13 PM	#7
ScotY Registered User Join Date: Feb 2001 Posts: 2,114	Hey Toshi, What about Align 3.2mm (1/8") bore pinions? I guess I could list 1/8" pinions too. How many teeth are they, and what's the part #? Toshi Last edited by TMorita; Mar 15, 2005 at 03:43 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sold Updated Crystals list	flybd	Aircraft - General - Radio Equipment (FS/W)	13	May 15, 2006 08:24 AM
Updated motor list	Rich	EFLIGHT Mailing List	0	Feb 15, 2005 11:11 PM

Feb 14, 2005, 05:38 AM	#2
Tonystott Hooked and loving it! Join Date: Oct 2004 Location: Forster, NSW, Australia Posts: 5,304	You knew some dopey B would ask, didn't you , but do you also have a list of the modules for the main gears on popular micro helis? EG GWS DF, Hummingbird, Aerohawk, Piccolo etc etc.

Feb 14, 2005, 06:02 AM	#3
TMorita Registered User Join Date: May 2002 Location: San Carlos, California, United States Posts: 7,513	I have most of them listed in the EHBG. IIRC, they're all 0.5 module except for the Hornets, which are 0.4 module. Toshi

Feb 14, 2005, 07:20 AM	#4
theShark Registered User Join Date: Jan 2005 Posts: 791	HPI Pinion Gear 8T Steel Micro RS4 72480 (Tower Hobbies LXBGE4)

Mar 15, 2005, 04:53 PM	#8
rotaryguy Registered User Join Date: Jul 2004 Location: Jacksonville, Florida Posts: 458	www.allerc.com is selling .5 mod pinions now, a nice selection of tooth and shaft sizes, slip on style

Mar 15, 2005, 05:06 PM	#9
Happy\|Harry veni,vidi, roto volubilis Join Date: Jul 2003 Location: Aberdeen, Scotland Posts: 6,062	toshi i think the RC18T pinions are .5 mod too as the RC18T pinions i just received have identical meshing to the RS4 pinions i have . i have both set's of the x-ray pinions en-route too, what type of composite are they? phil

Mar 27, 2005, 04:53 PM	#10
averen Love my Pike Superior! Join Date: Jul 2003 Location: Austin, TX Posts: 1,703	Any one know where I can find these X-Ray M18 pinions at? Thanks! Jared

Mar 27, 2005, 05:07 PM	#11
Happy\|Harry veni,vidi, roto volubilis Join Date: Jul 2003 Location: Aberdeen, Scotland Posts: 6,062	the X-Ray pinions have to be my favoute of the 3 i have, the only downside is that in the 4 pinion pack you only get 1 set screw. www.rc-union.com has the 13T, 14T, 15T, 16T (#385701) in stock just now, but he's waiting on the 17T, 19T, 21T, 23T (#385700) to come back in stock, he is one of the cheapest sources i found for the X-Ray M18 pinions and is a pleasure to deal with phil

Mar 27, 2005, 05:13 PM	#12
averen Love my Pike Superior! Join Date: Jul 2003 Location: Austin, TX Posts: 1,703	Phil, Thanks for the link! I'll have to wait for the other ones to get in stock too Have you tried drilling one of these out to a 3mm shaft? Thanks! Jared

Mar 27, 2005, 05:23 PM	#13
will p3 on a vacation Join Date: Aug 2003 Posts: 4,749	>.Align T-rex metal pinions w/ss (2mm bore, 0.5 module) 11T, 13T, 15T (HZ021)<< Is that correct i can only find with 2.3mm bore? thx for the info toshi .

Mar 27, 2005, 05:27 PM	#14
Happy\|Harry veni,vidi, roto volubilis Join Date: Jul 2003 Location: Aberdeen, Scotland Posts: 6,062	np jared . i've not tried drilling them out but there is enough material to do it, as long as your accurate it should be ok. i'll take some macro pics of the pinions i have tomorrow so check back then to see what you think phil

Mar 27, 2005, 05:31 PM	#15
averen Love my Pike Superior! Join Date: Jul 2003 Location: Austin, TX Posts: 1,703	I think it should work...drilling it out that is. I'll just put it on my drill press and hope for the best I'll probably try it on a smaller pinion first, just in case Jared