Blade MD520N gyro

J_mcc · Nov 07, 2009, 12:02 PM

Hi,
Someone from beginners section said maybe someone here can help me.
Hi,
My Police helicopter keeps spinning to the left. I do know the proportional gyro needs adjustment clockwise to stop this spinning. But the proportional screw in maxed out all the way clockwise now. Do I heed a new gyro, or can anyone help? Maybe some sort of re-set to factory conditions or something. I did move the screw the other way , but it then spins even worse. Thank you.

airwolf2006 · Nov 07, 2009, 01:32 PM

Read your post in beginners.Your ar6100 is right as long as you didnt switch any of the plugs around.Did you switch the motor plugs?Did you have the heli power off when you first tried to make the prop adjus ment?Have you tried the horizon Hobby website and read the cx3 manual?All the answers are there to adjust the 3 in 1.You must power down the heli each time before making an adjustment to the 3 in1.Once youve tried what the manual says let us know or if you have a question about the instructions in the manual.

Nov 07, 2009, 12:02 PM	#1
J_mcc Registered User Join Date: Nov 2008 Posts: 29	Blade MD520N gyro Hi, Someone from beginners section said maybe someone here can help me. Hi, My Police helicopter keeps spinning to the left. I do know the proportional gyro needs adjustment clockwise to stop this spinning. But the proportional screw in maxed out all the way clockwise now. Do I heed a new gyro, or can anyone help? Maybe some sort of re-set to factory conditions or something. I did move the screw the other way , but it then spins even worse. Thank you.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Discussion Blade 400 gyro problem	maRRRco	3D Electric Heli Flying	6	Yesterday 02:56 PM
Help! Blade MD520N gyro	J_mcc	Beginner Training Area (Heli-Electric)	5	Nov 19, 2009 05:50 PM
Discussion Good gyro for HB cp2 or Blade cp	primer	Micro Helis	15	Sep 24, 2009 04:38 PM
Discussion My new teetering head 2 blade gyro	grant31781	Auto Gyros	16	Sep 16, 2009 08:16 PM
Discussion Announcing the E-flite Blade CX3 MD520N	dribbe	Multi Rotor Helis	1	Jan 08, 2009 12:38 PM

Nov 07, 2009, 01:32 PM	#2
airwolf2006 Wish my coax could autorotate Join Date: Aug 2009 Location: Riverdale Md. Posts: 814	Read your post in beginners.Your ar6100 is right as long as you didnt switch any of the plugs around.Did you switch the motor plugs?Did you have the heli power off when you first tried to make the prop adjus ment?Have you tried the horizon Hobby website and read the cx3 manual?All the answers are there to adjust the 3 in 1.You must power down the heli each time before making an adjustment to the 3 in1.Once youve tried what the manual says let us know or if you have a question about the instructions in the manual.