Plans For Scratchbuilt Foamies - Page 9

hankg · Sep 15, 2009, 06:33 PM

oldpilot,

Beautiful job on the "Blackbird"! Brought back memories of Okinawa, 1968, when they flew out heading northwest. I remember looking up at one as it flew over at about 1000 ft and then the pilot kicked it into high gear and it literally disappeared from view in 3 seconds.

Thanks much for the memory,

Hankg

Mcdyvie · Sep 16, 2009, 12:18 AM

Here are some plans for the Speed Stick...Sport Flying Foamy.

http://www.rcgroups.com/forums/showthread.php?t=1111879

horsinaround · Sep 22, 2009, 10:33 AM

cool

maguro · Sep 29, 2009, 06:29 PM

Maguro
Blu-Guppy Sailplane http://www.rcgroups.com/forums/showthread.php?t=1043494 Plans in posts 71 and 78. (An electric powered sailplane using a 96 inch KFM3 wing).

oldpilot · Sep 29, 2009, 07:42 PM

Love that Blu-Guppy, and love building in foam.
Unfortunately I no longer have room for a model that big.

Cheers. Paddy.

aws1 · Oct 11, 2009, 02:55 PM

here or some plans for a wing type
its a good flying type and fast http://www.rcgroups.com/forums/showt...ighlight=ninja

have fun

gr

davereap · Oct 15, 2009, 06:37 PM

Here are a lot of pusher propjets...nice models free plans
and theres more
http://rc.tomhe.net/

Mattbee · Oct 24, 2009, 07:53 PM

Quote:

Originally Posted by wmcneal

Mattbee, here are the Tomhe F-22 Plans. In my opinion this is the best quick build F-22 plan available. Uses the regular or super park jet motor. Has thrust vectoring for awesome performance. A kit is also available from 6mmflyrc.com if you don't want to cut out parts.

can you please tell me where the CG is on the plans for the F-22 Raptor you gave me back on page 6

thank you,
mattbee

Mattbee · Oct 24, 2009, 08:08 PM

Quote:

Originally Posted by oldpilot

To Continue:-
The wings and in fact all the forward facing edges were sanded to a fairly sharp rounded edge. The outer wing panels were treated to a "Droop Snoot" treatment as in the full size and the wing tips were given about 4mm of washout to hopefully reduce tipstall tendencies.

The first flight was very twitchy as the large control surfaces had far too much throw. This was reduced mechanically and also an adjustable movement reducer was plugged in between the RX and the ailerons which allowed fine tuning of the aileron movement.

After that she flew fine. The Yellow tails were good for visibility in the air, but she was still a bit "Stealthy" if you got a bad background.

But this is what she looked like in the sky.

Battery was a Ni Cad flat pack placed right on the CG (for the needed slope soaring weight), four small servos on Y leads, and only a two channel TS was needed. Antenna was routed along the wing under the covering.
Altogether a very simple quick and inexpensive way to get a sharp looking and good flying Slope Soarer.
Cheers. Paddy.

have made any plans if you have I would like to see them I really want to build a SR-71.

Mattbee

oldpilot · Oct 24, 2009, 08:26 PM

Quote:

Originally Posted by Mattbee

have made any plans if you have I would like to see them I really want to build a SR-71.
Mattbee

Go back to page 8. Post 109. which tells you how to get the three view. Print it down A4 and take it to your local print shop and have it blown up to the size you want.

Cheers. Paddy.

wmcneal · Oct 24, 2009, 09:41 PM

Quote:

can you please tell me where the CG is on the plans for the F-22 Raptor you gave me back on page 6

thank you,
mattbee

Mattbee,

The CG for the Tomhe F-22 in post #90 is 21 1/4" from the nose of the plane.

warhead_71 · Oct 28, 2009, 01:06 PM

I am starting plans in my Blog for a 50" sport bipe:

http://www.rcgroups.com/forums/member.php?u=127601

Made from 1/2" pink and 1/4" blue foam, or equivalent.

Low Pass · Nov 07, 2009, 12:07 AM

Working on this one now:

Scratch built Depron Ki-61 Hien "Tony" plans and build log

http://www.rcgroups.com/forums/showthread.php?t=1136790

foam and tape · Nov 09, 2009, 08:34 PM

desinged and flew these, I had fun making the video

thanks to the other guys for making plans for me

http://www.rcgroups.com/forums/showthread.php?t=1124466

R/C multi purpose cargo plane (music video) (5 min 34 sec)

Jimmy JFlyer · Nov 09, 2009, 09:29 PM

Quote:

Originally Posted by foam and tape

desinged and flew these, I had fun making the video

thanks to the other guys for making plans for me

http://www.rcgroups.com/forums/showthread.php?t=1124466

R/C multi purpose cargo plane (music video) (5 min 34 sec)

OK, that video WAS awesome! Very cool stuff and very entertaining.
Towards the end when you were dropping vehicles & the tank was fun to watch. Especially when the tank was dropped in the grass, it lands on it's treads, and then proceeds to drive off.

Again, very cool man.

No I gotta go check the thread & see what gear & supplies I need to buy next!

Jimmy

Sep 29, 2009, 06:29 PM	#124
maguro Registered User Join Date: Apr 2007 Location: Bear, Delaware USA Posts: 429	Maguro Blu-Guppy Sailplane http://www.rcgroups.com/forums/showthread.php?t=1043494 Plans in posts 71 and 78. (An electric powered sailplane using a 96 inch KFM3 wing). Attached Thumbnails The Blu-Guppy 24.8 KB · Views: 176

Oct 11, 2009, 02:55 PM	#126
aws1 the flying duthman Join Date: Jul 2007 Posts: 11	ninja plans here or some plans for a wing type its a good flying type and fast http://www.rcgroups.com/forums/showt...ighlight=ninja have fun gr

Oct 15, 2009, 06:37 PM	#127
davereap Registered User Join Date: Feb 2005 Location: Ashford. Kent. England Posts: 2,008	Here are a lot of pusher propjets...nice models free plans and theres more http://rc.tomhe.net/ Attached Thumbnails 31.8 KB · Views: 102 61.6 KB · Views: 96 25.0 KB · Views: 120

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Alert Free Plans for Foamies (Post links here)	JAM	Foamies (Kits)	35	Sep 22, 2009 10:36 AM
Question Ideas & plans for 36” scratchbuilt sport plane?	cam777cam	Sport Planes	40	Apr 12, 2007 06:27 PM
Great free plans for foamies...	NetForce2K	Foamies (Kits)	5	Apr 28, 2003 05:02 PM
Plans for Fan-Fold-Foamies?	ForeverFlying	Foamies (Kits)	1	Oct 04, 2002 08:31 PM
Plans for Messerschmitt bf110 from Flair	bibblebum	Electric Plane Talk	3	Jul 31, 2001 02:23 PM

Sep 15, 2009, 06:33 PM	#121
hankg Registered User Join Date: Nov 2008 Posts: 104	oldpilot, Beautiful job on the "Blackbird"! Brought back memories of Okinawa, 1968, when they flew out heading northwest. I remember looking up at one as it flew over at about 1000 ft and then the pilot kicked it into high gear and it literally disappeared from view in 3 seconds. Thanks much for the memory, Hankg

Sep 16, 2009, 12:18 AM	#122
Mcdyvie Registered User Join Date: Jul 2009 Posts: 276	Here are some plans for the Speed Stick...Sport Flying Foamy. http://www.rcgroups.com/forums/showthread.php?t=1111879

Sep 22, 2009, 10:33 AM	#123
horsinaround Registered User Join Date: Apr 2008 Location: Wetumka, Oklahoma Posts: 105	cool

Sep 29, 2009, 07:42 PM	#125
oldpilot Registered User Join Date: May 2002 Location: Sydney Australia Posts: 5,088	Love that Blu-Guppy, and love building in foam. Unfortunately I no longer have room for a model that big. Cheers. Paddy.

Oct 28, 2009, 01:06 PM	#132
warhead_71 Gorilla Glue,... yummy Join Date: Dec 2006 Location: Chicago, IL Posts: 2,025	I am starting plans in my Blog for a 50" sport bipe: http://www.rcgroups.com/forums/member.php?u=127601 Made from 1/2" pink and 1/4" blue foam, or equivalent.

Nov 07, 2009, 12:07 AM	#133
Low Pass Some epoxy & it flies again... Join Date: Sep 2008 Location: Santa Cruz, California Posts: 195	Working on this one now: Scratch built Depron Ki-61 Hien "Tony" plans and build log http://www.rcgroups.com/forums/showthread.php?t=1136790