| RCCars | Crack Roll | Flying Giants | RC Power | The E Zone | Lift Zone | Our Sponsors | |||||||||
|
|
||||||||||||||
|
||||||||
|
|
|
Thread Tools |
| This thread is privately moderated by rmflyfish, who may elect to delete unwanted replies. |
|
|
#2 |
|
Registered User
|
Rookie
Bob Sealy made and sold one some years ago. It was called the Rookie. He is in Cookeville TN and I don't know if he is doing any fiberglass work or not. Brian
|
|
|
|
|
#3 |
|
Registered User
|
|
|
|
|
|
#4 |
|
Dragons, Windmills. All Same.
|
Now there is a challenge, with Bob Sealy. I wanted a Sagitta XC fuse years back and it did take some time and energy. Normal email did not work. Hard to recall if I called until I got was able to talk to him, or it I just sent a check for the amount plus a few. The fuse was very nice and was about 6" longer than stock. This was around 02-03 or so. No idea what he is up to, but his business, "Quality Fiberglass" is still there out on the net.
If not with Bob, keep trying as they do come up a few times a year or so. I believe one with plans went for around a hundred bills not long ago on Ebay, with shipping cost. Best of luck, and the 900 is on my ever eternal list....~~~~~~~~~ Jared |
|
|
|
|
#6 |
|
Klutzsquatch
|
Bob Sealy
I spoke with Bob a couple of months ago. He does not have regular e-mail but his website is still active. When i spoke with him he noted that he has had some change in his life with new full time employment and other positive personal diversions and was not as involved producing glider kits or parts.
I believe the way i made contact was i left voicemail at the telephone number on his website and he returned the call several weeks later. You might give that a try. |
|
|
|
|
#8 |
|
Dragons, Windmills. All Same.
|
Thought;
Perhaps if there were a commited list of 900 fuse and at an amount that would favor Bob to venture back in his shop for short time, many could be had. Food for thought! Jared |
|
|
|
|
#9 |
|
Hotdog Glider Pilot
|
I have one and a brand new set of plans from RCM Plans. PM me if interested in both as a set. Or my regular email is schrederman@yahoo.com
|
|
|
|
|
#10 |
|
Registered User
|
The Sagitta 900 must be a great sailplane. I have one that is not finished. So what is the story on the Cumic Plus? Never see or read anything on the Cumic Plus? I believe the Sagitta has the same wing as the Cumic Plus. E205
Better watch schederman Last edited by olyman; Nov 05, 2009 at 09:46 PM. Reason: Spelling! |
|
|
|
| Thread Tools | |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Discussion Wanted Sagitta 900 wing rib plans | alstrahm | Thermal | 17 | Nov 06, 2009 04:59 PM |
| Sold Sagitta 900 Airframe | Steve H. | Aircraft - Sailplanes (FS/W) | 3 | Oct 11, 2009 11:57 PM |
| Sagitta 900 Fiberglass fuse help please! | BHarris | Sailplane Talk | 5 | Aug 24, 2005 03:05 PM |
| Wanted Fiber Glass Sagitta 900 + or 600 Fuse | rcdude01 | Aircraft - Sailplanes (FS/W) | 13 | Aug 02, 2005 10:15 PM |
| Sagitta 900 fuse. | why2cay | Thermal | 2 | Jun 12, 2004 09:28 PM |