more speed for my Nitro Hammer

Cknoma · Jun 25, 2004, 12:05 AM

i wanted to know if i could modify my Nitro Hammer go faster. Maybe a
bigger engine? Will a 40 or 45 fit? Any info will help

Ron Olson · Jun 26, 2004, 07:43 PM

If you want to do a motor swap, stick with something it it's now engine size. A .45? No way Dude! The hull won't handle the HP and torque. how much money do you want to blow on this boat? Convert it to surface drive, get that header shortened somehow because at the length that it's presently at, the pipe is just a lousy muffler. right now, work with props and up the Nitro percentage a little with some good boat fuel.
Have you drilled a 1" hole in the canopy over the carb? This will allow cool air to get to the motor instead of sucking warm air in from the back.

hunter68 · Sep 19, 2009, 02:23 PM

just get some kind of metal prop i did on mine and it goes alot faster now

zen3 · Oct 04, 2009, 08:31 PM

Sorry to steal the lime light. But what surface drive and where should I buy it from for my hammer

ferral · Nov 01, 2009, 08:52 PM

i'll give u a drag race

ferral · Nov 02, 2009, 12:50 PM

Here's a vid

Aquacraft EP Hammer Upgraded to Brushless (Furious) (2 min 27 sec)

Ron Olson · Nov 02, 2009, 01:01 PM

Ferral, I'd race you if you weren't in Oz. You got a lot of bottom end end power but nothing at the top end. Yes, I'd run against you with my Super-Vee 27.
My son driving it like a fool........

SV 27 Nitro @ Kalamazoo Fun Run 2008 (4 min 44 sec)

I didn't shoot the video as I was busy elsewhere, I had a lot of boats with me that day. It plays twice for some reason.

ferral · Nov 03, 2009, 08:27 PM

lol cool Ron Olson,,,, lol hammer was something to do quick, it's only got a tiny,tiny motor, but i'd race your sv27 with my bj26 now thats got alot of go,go. Yeh my aqua-craft AIR-FORCE boat came a draw with my mates aqua-craft top speed moded nitro....spun me out...racing is so much fun, u just never know, what can happen...addictive hobby man........

Ron Olson · Nov 03, 2009, 11:45 PM

Wait until you see what I'm doing with a little .12, that baby will be hitting the mid to upper 60's when it's done!
OK, sneak peek..........

ferral · Nov 04, 2009, 10:07 AM

COOL Ron Olson....... thats what i wont one day, an out-rigger, so i can hit those three figure's

ferral · Nov 04, 2009, 10:11 AM

here's one of my other boats that i'll be doing up (making it faster)

Blackjack 26 brushless ( FERAL ) (2 min 9 sec)

Jun 25, 2004, 12:05 AM	#1
Cknoma Registered User Join Date: Jun 2004 Posts: 1	more speed for my Nitro Hammer i wanted to know if i could modify my Nitro Hammer go faster. Maybe a bigger engine? Will a 40 or 45 fit? Any info will help

Nov 01, 2009, 08:52 PM	#5
ferral Registered User Join Date: Dec 2008 Location: PERTH WESTERN AUSTRALIA Posts: 260	i'll give u a drag race Attached Thumbnails "upgraded" 142.9 KB · Views: 18 "brushless power" 142.5 KB · Views: 17

Nov 03, 2009, 08:27 PM	#8
ferral Registered User Join Date: Dec 2008 Location: PERTH WESTERN AUSTRALIA Posts: 260	lol cool Ron Olson,,,, lol hammer was something to do quick, it's only got a tiny,tiny motor, but i'd race your sv27 with my bj26 now thats got alot of go,go. Yeh my aqua-craft AIR-FORCE boat came a draw with my mates aqua-craft top speed moded nitro....spun me out...racing is so much fun, u just never know, what can happen...addictive hobby man........ Last edited by ferral; Nov 03, 2009 at 08:35 PM.

Nov 03, 2009, 11:45 PM	#9
Ron Olson Registered User Join Date: Apr 2004 Location: Kalamazoo, MI Posts: 1,042	Wait until you see what I'm doing with a little .12, that baby will be hitting the mid to upper 60's when it's done! OK, sneak peek.......... Attached Thumbnails 88.1 KB · Views: 22

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need speed for my GWS warbird!	fomocokid	GWS (Grand Wing Servo)	14	Jun 12, 2004 10:32 AM
Need a lil help with wind speed for my plane	tomi	Slope	6	Dec 15, 2003 10:23 AM
Help! How do I get more vertical for my GWS P51	Mmarshall	Power Systems	14	Mar 11, 2003 10:18 PM
More bodies for my TC3	Paradox	rec.models.rc.land	0	Dec 06, 2002 03:35 AM
More power for My Pico Stick ?	anfarol	Indoor and Micro Models	13	Jul 30, 2002 09:04 AM

Jun 26, 2004, 07:43 PM	#2
Ron Olson Registered User Join Date: Apr 2004 Location: Kalamazoo, MI Posts: 1,042	If you want to do a motor swap, stick with something it it's now engine size. A .45? No way Dude! The hull won't handle the HP and torque. how much money do you want to blow on this boat? Convert it to surface drive, get that header shortened somehow because at the length that it's presently at, the pipe is just a lousy muffler. right now, work with props and up the Nitro percentage a little with some good boat fuel. Have you drilled a 1" hole in the canopy over the carb? This will allow cool air to get to the motor instead of sucking warm air in from the back.

Sep 19, 2009, 02:23 PM	#3
hunter68 Registered User Join Date: Aug 2009 Posts: 6	just get some kind of metal prop i did on mine and it goes alot faster now

Oct 04, 2009, 08:31 PM	#4
zen3 Crash Join Date: Jun 2007 Location: NE Pa, Neffs Posts: 80	Sorry to steal the lime light. But what surface drive and where should I buy it from for my hammer

Nov 04, 2009, 10:07 AM	#10
ferral Registered User Join Date: Dec 2008 Location: PERTH WESTERN AUSTRALIA Posts: 260	COOL Ron Olson....... thats what i wont one day, an out-rigger, so i can hit those three figure's