|
|
|
 |
RCCars |  |
Crack Roll | |
Flying Giants | |
RC Power | |
The E Zone | |
Lift Zone | |
Our Sponsors |  |
|||||
|
|
||||||||||||||||||
Oct 30, 2009, 03:10 PM
|
#1 |
|
on a vacation
Join Date: Aug 2009
Posts: 206
|
3.2mm adapter for wicked fan???
Is there possible to get 3.2mm adapter
for 60mm wicked fan? I have a motor with 3.2mm shaft and I need a balanced 60mm wicked fan for it. Thanks |
|
|
|
Oct 30, 2009, 03:18 PM
|
#2 |
|
Wonderfully Wicked
 
Join Date: Jan 2002
Location: Willoughby, Ohio
Posts: 7,958
|
I use to have a few let me see if I still have one. The fan does have to be balanced with the motor installed.
Don |
|
|
|
|
Oct 30, 2009, 03:28 PM
|
#3 | |
|
on a vacation
Join Date: Aug 2009
Posts: 206
|
Quote:
Can I just purchase the balanced wicked fan and install the motor myself? Or do I need to send my 3.2mm shaft 3550kv motor to you to get your balanced service? Thanks. |
|
|
|
|
|
Oct 30, 2009, 03:41 PM
|
#4 |
|
Wonderfully Wicked
Join Date: Jan 2002
Location: Willoughby, Ohio
Posts: 7,958
|
I do have a 3.17 adapter. The washer and hex nut position when installed will change the balance of the fan. So I can balance it but then when you install it it the washer/nut will be in a different position so will go out of balance again.
|
|
|
|
|
|
| Thread Tools | |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Found Mini Fan PRO 480 70mm for 3.2mm NIB!!! | awayne | Aircraft - Electric - Jets (FS/W) | 11 | Sep 25, 2009 08:36 PM |
| Wanted Mini Fan PRO 480 for 3.2mm | The Don | Aircraft - Electric - Jets (FS/W) | 0 | Jun 28, 2009 11:24 PM |
| FS: Aeronaut direct drive 6x5 Carbon-Fiber prop w/ 3.2mm prop adapter | kyril | Aircraft - Electric - Airplanes (FS/W) | 1 | Jun 04, 2004 09:15 PM |
| Gunther prop adapter for 3.2mm shaft? | bmiller | Power Systems | 1 | Jul 27, 2002 12:49 AM |
| Is the "HLAN2403 PROPSHAFT ADAPTER FOR 3.2MM" the right prop adapter for the 6.5x4 pr | funflyer | Foamies (Kits) | 4 | Jul 06, 2001 11:40 PM |
|
|
