Thread: Discussion Springer Class R/c Boats
View Single Post
Old Jun 16, 2008, 10:04 PM
Umi_Ryuzuki is offline
Find More Posts by Umi_Ryuzuki
Sea Dragon-Lover
Umi_Ryuzuki's Avatar
PDX, OR
Joined Dec 2002
11,030 Posts
Quote:
Originally Posted by BOZINATOR
Very Nice Umi Do you have the final list of components that you used in your build? Both the Springer and Barge if you can.

Has anyone determined if a standard servo is doable or should it be Metal geared servo?

Thanks once again

jim
A standard servo is more than enough for a springer.
My rudder servo is a $9.99 special...


There is a list of components for the barge, but you won't like it...
It is just A Simple Barge though...

Am I supposed to remember how I built up the Springer?

__________________________________________________ _____________
This section updated...


Basic hull assembly
http://www.rcgroups.com/forums/showp...89&postcount=3

The Springer is just standard 1/4" plywood box frame with a balsa bottom.
Videos
http://www.rcgroups.com/forums/showp...postcount=4119
http://www.rcgroups.com/forums/showp...postcount=4123
http://www.rcgroups.com/forums/showp...postcount=4285
Launch for Distance...

Al Kinsmans captures a toss sequence.
http://www.rcgroups.com/forums/showp...postcount=5640

Springer Transportation box to fit airline "Carry On Luggage" dimensions 9"x14"x22".
Scroll down to the bottom of this thread... http://www.modelboatmayhem.co.uk/for...?topic=12221.0

2009 Trip to the Amsterdam Rotterdam and Madurodam.
http://www.rcgroups.com/forums/showthread.php?t=1030725

__________________________________________________ ___


I think that covers it so far...
I guess we can add Winches to the list..
G scale railroad wheels and axel turned down, and then some
side supports built up from styrene and a few bits.
Umi_Ryuzuki is offline Find More Posts by Umi_Ryuzuki
Last edited by Umi_Ryuzuki; Nov 19, 2014 at 12:03 PM.
Reply With Quote