View Single Post
Old May 29, 2008, 12:21 PM
phyxer is offline
Find More Posts by phyxer
USAF Retired
Altus, OK
Joined May 2007
527 Posts
I'll try and get some pics this evening of the finished bird. It really is a gorgeous plane. Great Planes got this one right I believe. In an attempt to provide more info on my now "contested" power system, here are Horizon's posted specs on my Power 32 motor"

Specs
Type:Brushless Outrunner
Size:Replacement for a 30- to 32 size glow engine
Bearings or Bushings:Ball Bearings
Wire Gauge:14
Recommended Prop Range:11x7 to 14x10
Voltage:12 - 16.8
RPM/Volt (Kv):770
Resistance (Ri):.02 ohms
Idle Current (Io):2.40A @ 10V
Continuous Current:42A
Maximum Burst Current:60A (15 sec)
Cells:10-14 Ni-MH/Ni-Cd or 3-4S Li-Po
Speed Control:60A Brushless
Weight:200g (7.0 oz)
Overall Diameter:42mm (1.70 in)
Shaft Diameter:5mm (.20 in)
Overall Length:50mm (1.90 in)
Needed to Complete
60A Brushless ESC
3S - 4S Li-Po or 10 - 14 Cell Ni-MH/Ni-Cd
11x7 to 14x10

As you can see, I have exceeded NOTHING! I have no intention of spending any notable time at WOT. I got this plane to be soley a sport flyer to have fun flying a box pattern doing touch and go's with.

Troy
phyxer is offline Find More Posts by phyxer
Reply With Quote