Originally Posted by reptileman
Thing is i also want something EASY to use and the LBA10 instructions look like it's very complacated to use.... After reading the Flight power V it seems much more user friendly....
As I have read them, it seems to me that the use of FP and LBA is exactly equal..
-Connect battery right.
-See how it blinks. If it goes dark(sleeping), wake it up by button press.
-IF You want to charge or discharge thru balancer, press the button to activate connection.
Hmm... and that is all.
Perhaps You get confused by possibility to link two LBA balancers to balance 12s pack.. Well, just ignore that part.
And PC or charger connection - ignore that as well.
Last difference, A123 mode:
LBA10_A can be switched between Lipo(green led with "Lipo" label) and A123 mode(red led with "A123 label"), by holding the button for 5 seconds. Setting is permanently stored so You do it only once.(if You are not using both types of packs). And there is really nothing more to do..
It dont seem to me being any complex, but it is possible that manual tries to explain all too detailed and seem long and complex. Seems, but is not.