View Single Post
Old Mar 27, 2008, 10:53 AM
DontTellTheWife is offline
Find More Posts by DontTellTheWife
Registered User
Joined Mar 2007
362 Posts
I've just completed a 50% reduced size build of this plane. Tomorrow I'll be driving to Orlando to pick out my motor, ESC and batteries.

Total weight (AUW) will be 8.3 oz.

I've selected the BP A2208-14 for my brushles motor.
http://www.bphobbies.com/view.asp?id...7&pid=B1898550

BP 18A Brushless ESC
http://www.bphobbies.com/view.asp?id...2&pid=B1198427

Either a 7.4V or 11.1V Thunder Power 1320mAh battery. Depends on if the 7.4V will power my ESC with three servos connected.

8x4 prop. should give me between 110 and 120 watts with the 11.1V battery, 75 watts with the 7.4V and a 9x5 prop.

The description of the motor says it's good for 3D planes around 8oz and aerobatics up to 12oz.

I've included a few pics.


Any comments are welcome. This is my first venture into Foamies.
DontTellTheWife is offline Find More Posts by DontTellTheWife
Reply With Quote