View Single Post
Old Jan 24, 2008, 07:48 AM
Jim Young is offline
Find More Posts by Jim Young
Designer/Builder
Jim Young's Avatar
Brighton, MI USA
Joined Jun 2000
2,005 Posts
Hi Tim,

Sounds like the 4S pack will work with this equipment. You should be able to find a suitable prop to adequately power your model. You will just have to draw a bit more current. In general I try to keep motor currents below 40A, as loses due to wire resistance, motor resistance, connectors, etc.. become more significant. Also, radio interference can become and issue as well. Everything you have will stand up to the currents you'll need, but pay close attention to the wiring and connections, and do a proper range check.

-Jim
Jim Young is offline Find More Posts by Jim Young
Reply With Quote