Originally Posted by Josiah
Can you give me the part number of the mixer required, and the Y-harness as well, I think I found the harness number on GWS web, but I cannot find the mixer....
The Y harness is "WE22/JR/30" or "WE22/FP/30" for W22 size, or "WY/JR/30" or "WY/FP/30" for W26 size. W22 is thicker one. JR and FP are for plug type.
The mixer is "GW/V-TAILN". Be reminded that you could not apply Ch 1 and Ch 2 on this Mixer with Futaba PCM transmitter, you have to use Ch 1 and Ch 3 instead in this case. It's totally okay if your Tx is PPM one or JR PCM one.