Thread: Build Log The Ritewing Build Thread
View Single Post
Old Jan 04, 2008, 01:23 PM
PaulVi is offline
Find More Posts by PaulVi
resU deretsigeR
PaulVi's Avatar
Dublin Ca
Joined Aug 2004
7,787 Posts
Speed Motor
http://www.gobrushless.com/shop/inde...&ref=MD2505-SP

The MicroDAN 2505 "Speed Series" enables parkflyer jets to achieve speeds over 100 mph by producing over 16 oz. of thrust at less than 25 amps on 3s lithium polymer packs. These are also the motor of choice for hydrofoam flying boats on 2s lithium polymer packs.

Need insane speed? Use a 4s lithium polymer pack and hold on while it turns your 4" prop at over 30,000 RPMs!

Features include dual color anodized alum. endbell with massive cooling holes, separate anidized alum. motor mount with dual set screws, hardened steel shaft with retaining clip, and an integrated prop saver using the supplied anodized alum. screws and o-ring.

Specifications:
Stator Width: 25mm
Stator Height: 5mm
Stator Poles: 12
Magnet Poles: 14
Weight: 34 grams

Recommended Props: GWS 8x4 HD (2s), ZAGI 5.1x4.9 (3s), or APC 4.25x4.24 (4s)
Recommended Batteries: 900 - 2000 mAH


or

Custom Motor
http://www.gobrushless.com/shop/inde...=MD2505-C-2535

The MicroDAN 2505 "Custom Series" are custom wound to suit certain requirements.This motor is a slightly lower Kv then the standard SPEED motor.
This motor is a 2535Kv version built for the APC 5x5 & 6x5.5 prop running on 4s Lipo.

18 Turns, 23AWG, DLRK, Delta, 14 magnet poles

Performance Data:
No Load 25350 RPM, 10V, 1.67A,
APC 6x5.5, 19800 RPM, 12.21V, 39A, 32oz thrust.
APC 5x5, 24400 RPM, 13V, 28A, 19oz thrust.
PaulVi is offline Find More Posts by PaulVi
Reply With Quote