View Single Post
Old Oct 28, 2007, 08:55 PM
bgriggs is offline
Find More Posts by bgriggs
Make something. Anything!
bgriggs's Avatar
Syracuse Hancock, New York, United States
Joined Jul 2003
1,024 Posts
wiring the switch

I thought I would try and make it clearer on exactly hoew I wired the transformer to the switch. The drawing on the rright shows the red wires and the one on the left shows the black wires.

The red wires from the Transformer are bundled together and soldered to the bottom two lugs of the switch. I spun the switch around for the photos so the connection could be seen.

The ribbed wire of the power cord (Large Blade) is wired directly to the two Black wires on the transformer.

The smooth wire of the power cord (small blade) is wired to the 4 amp fuse holder. The other connector of the fuse holder is wired directly to the remaining two lugs on the switch.
bgriggs is offline Find More Posts by bgriggs
Last edited by bgriggs; Oct 28, 2007 at 09:28 PM.
Reply With Quote