Originally Posted by moosemanty
at least it's ok
and good job with the fast thinking on the auto
Thanks moose, but more luck than skill I think.
Took it apart today and found that the motor shaft had a flat spot ground on it but not high enough for the grub screw on the pinion to make use of it. Took care of that with my trusty Dremel tool. A little thread locker and back in business.
A little breezy this morning but I flew the HDX-300 & CP-Pro around the yard anyway for a pack each. I think the HDX-300's main gear is slipping on the shaft when I pump up the pitch, need to check that out.