View Single Post
Old Jul 12, 2007, 10:51 PM
Roto Rob is online now
Find More Posts by Roto Rob
Registered User
Denver, CO
Joined Dec 2005
6,903 Posts
If you want to see if it "creeps" just move the tail to the side. If in HH mode the servo should travel to one side. If in rate mode it will travel towards one side and when you stop rotating the heli it should center. You can plug the gain into gear and use the gear switch. Adjust the end points on each side of the switch to control gain. Or use Aux 2 and use the gyro sens menu to control the gain and the switch used.
Roto Rob is online now Find More Posts by Roto Rob
Reply With Quote