Thread: Discussion Pictures of My Demon Family
View Single Post
Old May 21, 2007, 10:04 PM
TaSaJaRa is offline
Find More Posts by TaSaJaRa
More props are better than One
TaSaJaRa's Avatar
United States, AL
Joined Nov 2004
2,198 Posts
A few of my battery adaptors

I have made a few adaptors from deans plugs and 12ga wire to be used for 3s,4s and 6s from 2- 2s packs 4s and 3s2p from 2- 3s packs, along with 2-3s to do 6s.
Joekoz was wanting to see a few pics of how I made them.
The one I made in these pictures is not as small as I made the one in the first 2 pictures.
You can turn the male deans plugs to be opposite of each other and this will let you make the plug solder closer as the first 2 pics are of the red plug adaptor.

Pictures and description below

It's all up to you how you put them together. This is just a few I have done.
Another person made the longer one with the 12ga wire

Edited to add pics of how to make the smaller adapter.
I have also used these adapters @ 80amps without any problems.
not sure if it is a good idea to go higher.
TaSaJaRa is offline Find More Posts by TaSaJaRa
Last edited by TaSaJaRa; Apr 30, 2008 at 06:01 PM. Reason: added pics for the How to on a smaller plug adapter.
Reply With Quote