Thread: Build Log Depron Puddle Twin
View Single Post
Old May 07, 2007, 05:40 PM
meatbomber is offline
Find More Posts by meatbomber
meatbomber's Avatar
Klatovy, Czech Republic
Joined Mar 2004
3,418 Posts
thanks for the info lake flyer !

i`ll have to keep that in mind... about the step position, not much i can do that`s what the plans said. There`s quite a few folks building these here in europe and it seems they are all flying fine as is... not that that means it`s right

anyway i got some more stuff done..

Glued the Tip floats and cut the wing ! I stopped after gluing the ribs on to get a real good bond before starting to fold the wing. I used 6mm depron for the ribs instead of the 3mm as per the plans. i think that`s a good idea... gives a lot more area for the glue to hold on.

I put all the bits and pieces as well as all the radio gear and the scale to see if i`m still within the weight prediction. So far with a 3 Cell 900mAh Lipo i`m at exactly 250g
So i guess when everything is finished i`ll have a AUW of about 270g
meatbomber is offline Find More Posts by meatbomber
Reply With Quote