Thread: Build Log Depron Puddle Twin
View Single Post
Old Apr 27, 2007, 02:50 AM
meatbomber is online now
Find More Posts by meatbomber
Square-rigger
meatbomber's Avatar
Klatovy, Czech Republic
Joined Mar 2004
3,418 Posts
i use a combination of styro safe CA and contact glue... i try to use the CA only where i need to tack something down quick as it gets brittle and the contact glue (UHU Por for example) stays alwas a bit more flexible.

I Have Made the Ribs from 6mm Depron and thought about making a depron block with a short bit of silicone tube inside to hold the struts in the wing.. that should be plenty... the airplane is very light and if i touchdown bad enough to rip a tip float out i want to loose it without making damage to the wing. That gives you also the option of removing the floats for transport
meatbomber is online now Find More Posts by meatbomber
Reply With Quote