Thread: Discussion Pat Tritle's "Marina" Build
View Single Post
Old Mar 08, 2007, 07:42 AM
green-boat is online now
Find More Posts by green-boat
Boats on the brain!!
green-boat's Avatar
Arnold, Mo.
Joined Jul 2005
4,854 Posts
I would install the stuffing tube and get it all aligned before glassing the hull. That way you end up with a nice tight seal.

As for glassing, I cut a piece of cloth big enough to go over the entire hull with some hanging over the edge. Glass cloth will conform to the hulls surface so you can do all of the surfaces at once. You might have to do some trimming of the cloth to get around those square edges on the transom.
green-boat is online now Find More Posts by green-boat
Reply With Quote