Thread: Discussion SLOW-STICK X Build
View Single Post
Old Feb 25, 2007, 08:57 AM
jkarpy is offline
Find More Posts by jkarpy
jkarpy's Avatar
USA, FL, Orlando
Joined Aug 2006
2,027 Posts
Slow Stick / Slow Stick X improvements

One minor design flaw in the original Slow Stick is that the rubber band posts are too short.
Using 5/32 aluminum tubing, cut 4 3/8 long pieces. Use thick CA glue and glue them to the existing rubber band posts of the original Slow Stick wing saddles. Make sure you do not leave sharp edges that can cut the rubber bands. I like to fill the tube with thick CA and leave a bead at the top of the tube. If you do not have a tubing cutter, you can use an Exacto knife in a rolling action to cut the tubing.







Return to build thread
http://www.rcgroups.com/forums/showt...92#post6970305
jkarpy is offline Find More Posts by jkarpy
RCG Plus Member
Last edited by jkarpy; Apr 26, 2007 at 02:04 AM.
Reply With Quote