View Single Post
Old Jan 06, 2003, 12:42 PM
nickybee is offline
Find More Posts by nickybee
Registered User
Joined Jan 2003
3 Posts
I have this setup...

I used PMIX 1 (turns on and off with the gear switch) to bind (100%) channel 2 to channel 6.

I set channel 6 as master, and channel 2 as slave.

I have it connected as 2=elevator and 6=right aileron. (use 180 degree mixing)

this seems to work fine.

mind you haven't flown it yet.

nick
nickybee is offline Find More Posts by nickybee
Reply With Quote