|
After Day one in my brushless build. After seeing barnyard's method of attaching leads and combining I changed my mind about soldering both ESCs directly to the deans connector. Things, I've completed:
1) Soldering 2mm bullet connectors to the ESCs (I think this is going to be the way to go. On my shocky I used the deans mini 3 plug, on an Alfa corsair, I soldered the ESC directly to the motor. I always wondered how people were "easily" changing out their motors. When I'm bored I will probably go back and put 2mm bullet connectors on all my engines)
2) Soldered the "Y-Harness" combining both ESCs.
3) Burnt the H%!! out of my finger, and put a small fortune in the "Cursing Jar"
|