View Single Post
Old Jan 10, 2007, 06:46 AM
GliderGuideMan is offline
Find More Posts by GliderGuideMan
Kite flying SCRAPS member
GliderGuideMan's Avatar
Hampshire, UK
Joined Apr 2004
1,015 Posts
OK I thought it was about time I posted up my Magpie AP

It is box standard except I have carbon/kevlar clothed around the landing gear mount and used 6mm carbon strip to reinforce the fin and elevator (you can just see it in the pictures)

Fuz is 12.75oz
3S 1200 Lipo is 3.5 oz
Canon A620 is coming in at 12oz
Wing is 8oz
That makes AUW 36.25oz
Power is from an Axi 2212/34 with 10x7 prop

I have only had one flight so far and had real problems with it rearing up wildly when power is applied (glide is nice) As you can see I have added in more downthrust but no had chance to check it out

DaveB...>
GliderGuideMan is offline Find More Posts by GliderGuideMan
Reply With Quote