Thread: Build Log Peter Rake IPS Nieuport Mono
View Single Post
Old Sep 04, 2006, 06:14 PM
65Chevelle is offline
Find More Posts by 65Chevelle
No Wind
65Chevelle's Avatar
Long Island
Joined Jul 2006
292 Posts
Pete: I hadn't thought of the toy motorcycle/ bicycle wheels. What a good idea. I was thinking of making my own and have been searching the net for a plan on making the jig. Toys might be an easier option.
As for the questions/comments: I built in the rib dihedral based on former F3/F3A. There is no dihedral given on the plan. I trust the former since this is a plan for a laser kit.
The rigging blocks in the wings go from top to bottom. I had to look it up on your original build. This was not clear to me from the plans. No rigging details or information is shown regarding the rigging. I don't know if you normally show this but it would be helpful.
I'm going to take off the motor thrust angle straight off the drawing since it isn't specified. Okay?
Lastly, built up former F4 is incorrectly labeled as 3/32 x 3/6. That should be 3/16?
All minor, but I wanted to mention them. I'll be working on the fuse starting tomorrow.
Chris
65Chevelle is offline Find More Posts by 65Chevelle
Reply With Quote