Originally Posted by 65535
Use a nimh or nicd setting I would use a nimh setting myself.Set the charge rate to .2 amps set the cell count to 9S ni and charge it until the voltage is 11.1V even better if you have an lba6 wich will terminate charge since a ni setting won't detect the peak of a lithium cell since there isn;t such a thing.
Hmmm, can you do that with a Triton in Ni mode? Set the cell count?
Set it for Ni, 0.2 amps, watch the voltage. At 10.5 volts, charge as a 3 cell LiPo.