My Piper cub L4 conversion...........
View Single Post
May 02, 2006
, 12:46 PM
Durafly Brand Manager
Hong Kong, Hong Kong Island, Central And Western District
Joined May 2001
Ok sorry for a slight (
) delay in post some news, but there hasn't really been any until this weekend.
Anyway I've covered the entire model now, ready for the first coat of spray. After this I'll attach all flaps etc and spray a final coat of olive drab, but before all of this I'll be sticking the plastic sheet (glazzing) on and masking ready for spraying. Then, once its all rigged, we'll give it a test fly i guess
BTW, ignore the messy bits around the front of the cabin area/glazzed wing, this will all be made tidy and presentable with the spraying of olive drab.
View all Images in thread
the messy bit
tx for scale
hole @ rear is an air out vent and rx exit. Pull Pull on the rudder and P/R on the elv
Latest blog entry:
One ticked from the bucket list,...