Schulze 18.46K v7.02 - so far, so good!
Today I had the opportunity to fly a fellow pilot's brand new Logo 10! Its equipped pretty much like GWRIGHT recomends:
Hacker B50-11L motor
Schulze 18.46K ESC v7.02 (More on this below)
15 tooth pinion
Futaba 3102 servos
12 cell CP2400 pack
We only had the opportunity for 1 flight. But what I can say is that the heli is SMOOTH! He did an EXCELLENT job building the heli and the wood blades were near dead on in balance - tracking wasnt even needed! Motor has gobs of power, duration seemed around 5 minutes. We're still trying to get the 401 set up right, along with better throttle/pitch curves and it will be perfect. But the main reason for this post is to say the Schulze 18.46K is working perfectly. No failures on the first run up as reported with versions built prior to 7.02 (Like my 5.02, stuck in customs for upgrade, arg). Hopefully this weekend or Monday we'll get some real stick time on it! Power is there for some serious acro, but this is his next step up from the Corona and I think he'll need a few flights on it before the training gear come off and he flips it inverted
Is everyone else having luck with their newer or updated 18.46Ks?