Thread: Discussion Working Micro BL Powered Models
View Single Post
Old Aug 25, 2005, 07:37 PM
matchlessaero is offline
Find More Posts by matchlessaero
Registered User
matchlessaero's Avatar
Tennessee/Mid-South US
Joined Mar 2002
1,534 Posts
Matchless Micro Edgeling

Below is my Matchless Micro Edgeling. This airplane was designed specifically to fly 3D aerobatics with micro brushless power. Its performance with the Mighty Midget motor is on par with any of its larger siblings in the 10-14oz category. Its capable of Upright, Inverted and Rolling Harriers, Hovering/Torquerolling, High alpha Knife Edge, flatspins, etc. It also tracks very well in normal flight thanks to the built up wing. The model in the vid weighs in at 41 grams, but sub 40 is pretty easily achievable with the design. The Model in the pics used a 3s 145mah pack and the Gary Jones 7g Brushless motor.

Specs are:
Wingspan- 16"
Weight- 41 grams
Construction- Depron, Balsa, Carbon, Heatshrink covering material
Servos- Falcon 1.7g
Receiver- JMP Servo Reciever
Battery- 2s 145mah
ESC- HeinoJung YG4BL
Prop- GWS 5-3
Motor- Mighty Midget Double Whopper (has also been flown very successfully with the Gary Jones 7g brushless)

Attached below is a vid of one of the first Mighty Midget brushless powered flights with the Micro Edgeling at the 2005 Little Rock SMALL.
matchlessaero is offline Find More Posts by matchlessaero
Last edited by matchlessaero; Aug 26, 2005 at 05:45 PM.
Reply With Quote