View Single Post
Old Aug 10, 2005, 01:49 AM
Red Bullie is offline
Find More Posts by Red Bullie
Registered User
Red Bullie's Avatar
Julianadorp. the netherlands
Joined Feb 2005
614 Posts
Originally Posted by mollycbr123
I was thinking it might be a bumper against the battery to limit swingarm sag. If it works, it's a pretty good idea, as the nitro bikes can tend to eat rear shocks regularly.

But it looks more like a chain guide.

Its two way!! yes it rest against the battery's so your first guess is right,(see the first pic) and it strengten the swingarm incase of a crash ,i also made a little alu rest so the battpack don't get damaged and is protected.
it has nothing to do with a chain guide and the clearance is enough so it won't ware out.

now i have to see and wait if it will work to keep the shock a little longer at one piece.

a other mod i did is i made the hole of the rotostart or pullstart in the left main frame bigger so i can take that part out without pulling the frame apart. i found that a irritating. so easy access on the oneway bearing.

Red Bullie is offline Find More Posts by Red Bullie
Last edited by Red Bullie; Aug 10, 2005 at 01:57 AM.
Reply With Quote